Important Safeguards

!CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

CAUTION used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage.

NOTE provides additional information that is useful for proper use and maintenance of this tool. If a NOTE is indicated make sure it is fully understood.

People with electronic devices, such as pacemakers, should consult their physician(s) before using this product. Operation of electrical equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker.

Some dust created by grinding, drilling, sawing, sanding, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

•Lead from lead-based paints,

•Crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

Handling the power cord on this product may expose you to lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

POWER TOOL SAFETY AND USE

PERSONAL SAFETY

Stay alert. Watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

Before use, check for damaged or defective parts. Do not use the tool if any part is damaged or defective. Carefully check the tool for damage. Check for breakage of parts, damage to guards, switches, misalignment and seizure of moving parts, or any other conditions that may affect the tool’s operation. Ensure that the tool will operate properly and perform its intended function. Have any damaged or defective parts repaired or replaced by an authorized repair agent. Never attempt to do any repairs yourself. Do not use the tool if the switch does not turn it “ON” or “OFF”.

Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat or hearing protection must be used for appropriate conditions.

Dress properly. Do not wear loose clothing or jewelry. Keep long hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.

Remove adjusting keys or wrenches before turning the power tool “ON”. A wrench or a key that is left attached to a rotating part of the power tool may result in personal injury.

Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the power tool in unexpected situations.

840068 specifications

The Kawasaki 840068 is a versatile and powerful piece of equipment designed to meet the demands of various industries, including construction, landscaping, and agriculture. With its robust build and advanced technologies, it stands out as a reliable choice for professionals seeking efficiency and durability.

One of the key features of the Kawasaki 840068 is its powerful engine. Equipped with a high-performance gasoline engine, it delivers exceptional torque and horsepower. This ensures that the machine can handle heavy loads and tackle tough jobs with ease. The engine is designed for fuel efficiency, allowing for longer operational times without frequent refueling, which can significantly enhance productivity on the job site.

In addition to its powerful engine, the Kawasaki 840068 features advanced hydraulic systems. The hydraulic system provides superior lifting capabilities, making it suitable for a range of applications, from lifting heavy materials to operating various attachments. The ergonomically designed controls offer ease of use, allowing operators to maneuver the equipment with precision and confidence.

The Kawasaki 840068 is built with durability in mind. Its robust frame and high-quality materials ensure it can withstand the rigors of daily use in demanding environments. The machine is also designed for easy maintenance, featuring accessible engine components and a user-friendly layout. This reduces downtime and helps keep the equipment in optimal working condition.

Another notable characteristic is the machine's versatility. The Kawasaki 840068 can be fitted with a variety of attachments, including buckets, forks, and specialized tools, making it adaptable for numerous tasks. This flexibility allows professionals to use a single machine for different applications, thereby maximizing their investment.

Safety is a paramount consideration in the design of the Kawasaki 840068. The machine is equipped with various safety features, including secure operator cabins, emergency stop functions, and advanced braking systems. These elements work together to provide a safe working environment for operators.

In conclusion, the Kawasaki 840068 combines power, efficiency, and versatility. Its advanced technologies and robust design make it an ideal choice for professionals across multiple sectors. Whether for heavy lifting, material handling, or site preparation, the Kawasaki 840068 stands out as a dependable machine capable of enhancing productivity and performance.

Kawasaki 840068 instruction manual Important Safeguards, Power Tool Safety and USE Personal Safety

Models: 840068