REMOVING/ATTACHING BATTERY PACK

REMOVE BATTERY PACK:

1. Press both release buttons on either side of the Cordless Drill to release the battery pack.

2. Pull battery pack free of Cordless Drill.

ATTACH BATTERY PACK:

1. Align the raised portion of the battery pack with the groove in the battery compartment of the Cordless Drill.

2. Press the battery pack into place. Make sure

RELEASE

the latches are securely fastened. Do not use BUTTON the Cordless Drill if the battery pack is not

seated properly.

CHARGER

Before using battery charger, please read carefully all instructions and cautionary markings on battery charger, battery pack and product using battery.

Use only the charger which accompanied your product or direct replacement as listed in this manual. Do not substitute any other charger. Use only Alltrade approved chargers with your product.

Do not disassemble charger.

Do not use charger if it has been damaged, left outdoors in the rain, snow, wet or damp environments, or immersed in liquid.

The battery pack and charger heat during charging. Place the charger on a flat, non-flammable surface away from flammable materials with at least four inches of clearance to allow proper air circulation around the charger and battery pack.

When the battery pack requires recharging, a 1 hour charge allows the tool to operate at full power. A charging indicator light on the charger will illuminate to show that charging is taking place.

CHARGING BATTERY PACK

CHARGE BATTERY PACK:

BATTERY PACK

1. Plug the charger into the

 

nearest 120 volt electrical

 

outlet. The step of the

 

battery has positive and

 

terminal markings on it.

 

Align the markings on the

 

identical markings on top of

 

the charger base. Insert the

 

battery pack into base. Pack

 

will not insert properly if

 

reversed.

BATTERY

 

2. Make sure the trigger on the

CHARGER

Cordless Drill is in the “OFF” position and remove the battery pack from the Cordless Drill.

3.If, when first inserting the battery pack, the red “ON” button does not light up, press the “SET” button on the charger. When the battery is charging, the red light is “ON”.

4.After approximately one hour of charging, the red indicator light should go “OFF” and the green light should come “ON” The green light indicates that the battery is fully charged.

5.When fully charged, reattach battery pack onto the Cordless Drill, making certain latches fasten securely. Cordless Drill will not operate properly if the battery pack is not seated properly.

IMPORTANT INFORMATION FOR RECHARGING HOT BATTERIES

When using your Cordless Drill continuously, the batteries in your battery pack will become hot. You should let a hot battery pack cool down for approximately 30 minutes before attempting to recharge. When the battery pack becomes discharged and is hot, the red light on the charger will flash. When the battery pack cools down, the red light will glow continuously to indicate fast charging mode, 1-hour charge time.

This will occur when continuous use of your Cordless Drill causes the battery pack to become hot. It does not occur under normal circumstances.

11

12

Page 7
Image 7
Kawasaki 840097 instruction manual REMOVING/ATTACHING Battery Pack, Charger

840097 specifications

The Kawasaki 840097 is a notable entry in Kawasaki's esteemed lineup of outdoor power equipment, designed primarily for efficiency and durability. This model is especially recognized for its robust construction, making it ideal for both residential and commercial landscaping tasks.

One of the standout features of the Kawasaki 840097 is its powerful engine. Equipped with a high-performance engine, it provides a reliable source of power, ensuring that users can tackle even the toughest jobs with ease. The engine is designed to optimize fuel efficiency while delivering consistent performance, which is a crucial factor for users who require extended operational periods without frequent refueling.

The Kawasaki 840097 also incorporates advanced technology to simplify operation and enhance user experience. Its ergonomic design includes comfortable grips and controls that are intuitively placed, allowing for easy handling. This attention to user-centric design minimizes fatigue during extended use, making it a preferred choice for professionals and enthusiasts alike.

Another major characteristic of the Kawasaki 840097 is its versatility. The model supports a wide range of attachments, which means it can be customized for various applications. Whether users need to mow grass, trim hedges, or blow leaves, this model can adapt to meet those needs, making it a multi-functional tool for any landscape maintenance job.

Maintenance is straightforward thanks to the design of the Kawasaki 840097. Easy access to essential components reduces downtime and empowers users to perform routine maintenance tasks quickly. The manufacturer's focus on longevity means that users can expect a long service life from this equipment with proper care.

Durability is another hallmark of the Kawasaki 840097. Constructed with high-quality materials, this model can withstand the rigors of regular use without compromising performance. The robust build ensures that it can handle demanding environments, making it suitable for both commercial landscaping and intensive home use.

In summary, the Kawasaki 840097 is a versatile, powerful, and durable piece of equipment that caters to the needs of landscapers and homeowners alike. With its efficient engine, user-friendly design, and focus on maintenance, it stands out as an exceptional choice for anyone looking to invest in reliable outdoor power equipment. Whether being used for small residential projects or large-scale commercial tasks, this model is designed to deliver excellent performance and lasting satisfaction.