PERSONAL SAFETY

Stay alert, watch what you are doing, and use common sense when operat- ing a power tool. Do not use tool while tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.

Avoid accidental starting. Be sure the switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on invites accidents.

Remove adjusting keys or wrenches before turning the power tool “ON”. A wrench or a key that is left attached to a rotating part of the power tool may result in personal injury.

Do not overreach. Keep proper footing and balance at all times. Proper foot- ing and balance enables better control of the power tool in unexpected situa- tions.

Use safety equipment. Always wear eye protection. Dust mask, non-skid safe- ty shoes, hard hat or hearing protection must be used for appropriate conditions.

TOOL USE AND CARE

Use clamps or other practical ways to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.

Do not use the tool if the power switch does not turn it “ON” or “OFF”. A tool that cannot be controlled with the switch is dangerous and must be repaired.

Disconnect the power cord plug from the power source before making any adjustments, changing accessories or storing the tool. Such preventive safe- ty measures reduce the risk of starting the tool accidentally.

Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.

5

Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with a sharp cutting edge are less likely to bind and are easier to control.

Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.

Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may create a risk of injury when used on another tool.

SERVICE

Tool service must be performed only by qualified repair personnel. Service or maintenance by unqualified personnel may result in a risk of injury.

When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injury.

SPECIFIC SAFETY RULES AND/OR SYMBOLS

Hold tool by insulated gripping surfaces when perform- ing an operation where the cutting tool may contact hidden wiring. Contact with a “live” wire will also make exposed metal parts of the tool “live” and shock the operator.

SAFETY RULES FOR ANGLE GRINDERS

Never use this tool without the proper guard. The grinding wheel could shat- ter during use. Make sure the guard covers the side of the wheel facing you.

Never bounce the tool while grinding. This may crack the wheel.

Grinding metal will cause sparks! Keep them directed away from people and flammable materials. Always keep the guard positioned so that as much of the exposed disc as possible is pointing away from you.

Keep children and pregnant women away from the work area until the grind- ing is completed and the area has been cleaned up.

Always wear full eye, face and body protection. Wire bristles may break off and fly toward the user. Always wear ear protection when grinding in enclosed spaces. Noise level may be amplified in such locations and may cause permanent hearing loss.

Page 3 Page 5
Page 4
Image 4
Kawasaki 840273 instruction manual Personal Safety, Tool USE and Care, Service, Specific Safety Rules AND/OR Symbols
Page 3 Page 5

840273 specifications

The Kawasaki 840273 is a powerful industrial engine designed to deliver exceptional performance and reliability across various applications. Renowned for its durability, this engine is particularly suitable for heavy-duty equipment, including construction machinery, agricultural vehicles, and power generators.

One of the standout features of the Kawasaki 840273 is its robust construction. Engineered with high-quality materials, it boasts a cast iron block and cylinder head that ensure long-lasting performance even in the most demanding environments. This durability not only extends the lifespan of the engine but also reduces the frequency of maintenance required, translating to lower operational costs for businesses.

In terms of technology, the Kawasaki 840273 employs advanced fuel injection systems that optimize fuel efficiency and power output. This precise fuel delivery enhances combustion efficiency, resulting in improved torque characteristics and reduced emissions. The engine’s turbocharging capability further amplifies its performance, allowing it to maintain high power levels even at lower RPMs, making it an ideal choice for applications requiring immediate responsiveness.

Another significant characteristic of the Kawasaki 840273 is its ease of integration into existing systems. The engine is designed with versatility in mind, featuring standard mounting points and electrical connections that streamline installation. This adaptability ensures that operators can quickly incorporate the engine into various setups without extensive modifications.

The Kawasaki 840273 also prioritizes operator comfort and safety, equipped with comprehensive monitoring systems that provide real-time data on engine parameters. This enhances overall efficiency and empowers users to make informed decisions, ultimately improving productivity. Additionally, the engine’s design minimizes vibration and noise levels, creating a more pleasant working environment.

Moreover, the Kawasaki 840273 complies with stringent environmental regulations, making it a responsible choice for businesses aiming to reduce their carbon footprint. Its design minimizes harmful emissions and optimizes fuel consumption, aligning perfectly with the modern industry's push towards sustainability.

In conclusion, the Kawasaki 840273 stands out as a leading choice for industries requiring a dependable and efficient industrial engine. With its combination of advanced technology, robust build quality, user-friendly features, and environmental compliance, it continues to set the standard for performance and reliability in various applications.
Top Page Image Contents