Kawasaki K10400-040 NOTICE

zAll other audio devices connect to the round 3.5mm headphone

or line out socket.

oBe sure to adjust the media player volume level to at least a few

steps below maximum output to ensure the signal going to the

radio is not distorted. This will also help conserve battery life.

zWith the connection side of the device facing downward, insert

it into the underside slot of the supplied foam cushion. The

wider slot is designed to accommodate devices such as the

iPod. The smaller slot is sized for devices such as the iPod

nano®. Larger devices such as cassette or CD players may

require modication of the cushion or may be too large to t

inside the fairing pocket.

zCarefully coil the cable and connectors under the cushion.

Insert the cushion into fairing pocket until the upper edge of the

cushion is no more than ½” above the top of the pocket.

zClose and latch the cover.

NOTICE

Do not operate the motorcycle without rst closing and

locking the fairing pocket lid.

oAll Apple iPod devices with the 30-pin dock connector will

display song title, artist, etc and the iPod will be charged. The

iPod adapter cable is not designed to work with the iPhone™.

oIf using any other media player, only volume can be controlled

and displayed.

oIf using any media player that will not t inside the cushion,

care must be taken to protect it from road vibration and shock.

zRemove the cushion and media player from the fairing pocket.

zDisconnect the media player from the adapter cable.

zCarefully remove the media player from the cushion.

zReplace the cushion and adapter cable in the fairing pocket.

Close and latch the cover.

Kawasaki Motors Corp., U.S.A. will not be responsible for any loss or damage to devices used with this

kit.