S E R V I C E I N S T R U C T I O N S

Part # 037983

 

 

 

 

 

www.keatingofchicago.com

 

 

 

1-800-KEATING

 

 

 

 

 

 

 

 

 

 

INSTALLATION INSTRUCTIONS FOR SPARK

IGNITION MODULE #037981

For IFMs With Spark Iginition Module Mounted in the Blower Box

1.Remove blower box front cover from the cabinet. Remove blower box cover from the base plate exposing the obso- lete dual electrode spark iginition module (Part # 019724) and the relight circuit box.

FIG 1. WIRING DIAGRAM FOR IFMs WITH DUAL−ELECTRODE SPARK IGNITION

MODULE (PART # 019724) AND RELIGHT CIRCUIT

2.Locate wire # 16, 20, 18 and 69 between the old spark module and relight circuit. Disconnect and discard the wires. Discard the wire # 15 and 17 connected between the terminal board and relight circuit.

3.Disconnect wire # 16, 20, 23, 31, and 69 from the old spark module.

4.Locate the two spark iginition electrode leads connected between the dual-spark iginition module and the two burner electrode assemblies that are mounted behind the IFM’s control panel back.

5.For gaining access to the two burner electrode assemblies, unscrew and remove the control panel followed by the control panel back. Unplug both ends of each of the spark iginition electrode leads, one end from the obsolete spark module and the other end from the corresponding burner electrode assembly. Discard the two unplugged spark iginition electrode leads.

6.The dual-electrode obsolete spark iginition module is totally disconnected from the IFM circuit. Unscrew and discard the module. Also disconnect the wire # 19 from the relight circuit. Unscrew the relight circuit box and discard it.

Part # 037983

SpkIgModInst_037981_BB

 

9/08

Page 1 Page 2
Page 1
Image 1
Keating Of Chicago installation instructions Installation Instructions for Spark Ignition Module #037981
Page 1 Page 2

037981 specifications

Keating of Chicago 037981 is a distinctive project that stands out in the world of urban architecture, showcasing a harmonious blend of elegance, functionality, and sustainability. Designed to meet the needs of modern living, this building captures the spirit of Chicago while incorporating state-of-the-art technologies and features that elevate its status in the cityscape.

One of the main features of Keating of Chicago is its impressive exterior design, which uses a combination of contemporary materials and traditional aesthetics. The façade reflects the rich architectural heritage of the city, while large windows flood the interiors with natural light, creating a warm and inviting atmosphere. The thoughtful use of space extends to the residence layouts, which are optimized for both comfort and utility, providing ample storage and functional areas for daily living.

Technologically, Keating of Chicago 037981 is outfitted with smart home systems that allow residents to control lighting, climate, and security from their devices. This integration of technology not only enhances the living experience but also offers convenience and energy efficiency. With features such as programmable thermostats and advanced security systems, residents can enjoy peace of mind and cost savings over time.

Sustainability is at the core of Keating of Chicago’s design philosophy. The building incorporates eco-friendly materials and energy-efficient appliances to minimize its carbon footprint. Green rooftops and landscaped terraces add to its environmental appeal, promoting biodiversity in an urban setting. Additionally, the project prioritizes water conservation techniques and energy-saving systems, aligning with modern ecological standards.

The residence features a range of amenities that cater to the lifestyle of its inhabitants. From a state-of-the-art fitness center to communal lounge areas, residents can enjoy a wealth of opportunities for relaxation and socialization. The inclusion of private outdoor space further enhances the living experience, allowing for a seamless blend of indoor and outdoor living.

In summary, Keating of Chicago 037981 exemplifies the quintessential urban living experience, combining exquisite design, advanced technology, and a commitment to sustainability. This project not only reflects the character of Chicago but also sets a benchmark for future developments, making it a noteworthy addition to the city's architectural landscape.
Top Page Image Contents