Keating Of Chicago Flame Switch manual

SERVICE INSTRUCTIONS
FLAME SWITCH REPLACEMENT KIT
Part # 037406
1.) Remove old flame switch and bracket located inside control panel. (Retain hardware). Assemble
flame switch item Ato bracket item D with items E and F. Slide bulb end of flame switch through
center hold in item D flame switch bracket and through hole located in control panel. If needed, use
a letter “n” drill to open hole. Reassemble to control panel with retained hardware.
2.) Remove old flame switch and clip (bulb end) and replace with new flame switch item A(as
shown in view “A”.)
3.) Insert flame switch clip item B as shown in view “A.” Secure with screw item C.
FlameSwitchRplcKit
8/08
www.keatingofchicago.com 1-800-KEATING
Part No. 037407
ITEM
D
Your kit includes:
ITEM
NO.
ITEMS
E, F
SEE NOTE #1
ITEM
A
ITEM
C
ITEM
B
CORRECT POSITION FOR
FLAME SWITCH BULB
PILOT RUNNER TUBE
VIEW “A”
SEE NOTES 2 AND 3