Keating Of Chicago IM-2000 manual Operating the Controller, Starting a Cook Cycle, Action Alarms

NOTE: Not all features are available on all models.

OPERATING THE CONTROLLER

Starting a Cook Cycle

To start a cook cycle, simply press the product key for the product you wish to cook. If the product key

is programmed, the correct cooking time will be displayed (example) and this time will immediately start

to count down in minutes and seconds. The pressure solenoid will also close if programmed to do so. If is displayed immediately and the unit starts to signal, the key being operated is not programmed. If correctly pro-

grammed, it will count down to followed by and start to signal.

Cancel this signal by pressing the same cycle product key used to start the cook cycle.

Action Alarms

If the unit is programmed with action alarms, the action alarms will signal at a preset time during the cooking cycle;

for example, . This signal, a dual rhythm beeping, will last 5 seconds and then self-cancel. The display

will flash the action alarm time and the unit will then start counting toward .

Holding Timers

If the unit is programmed with holding times, they will automatically start counting upon expiration of the cook- ing cycle.

When there are active hold times, the HOLD indicator will be lit. To view all active hold times, press and hold the

key. Upon expiration, the timer will display and pulse with an audible tone.

4	THE UNAUTHORIZED USE OR DUPLICATION OF THE SOFTWARE DESCRIBED HEREIN,
	OR THIS MATERIAL IS STRICTLY PROHIBITED.