WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE

THIS APPLIANCE TO RAIN OR MOISTURE

RISK OF

ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK

OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

•A combined mains power input lead and country specific mains plug is provided.

•Check before connecting to your local mains supply that the local supply voltage is the same as that marked on the rear panel. If it is not, check with your supplier before proceeding.

Explanation of Graphical Symbols

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the products enclosure that may be of a sufficient magnitude to constitute a risk of electrical shock to persons.

The exclamation mark within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING:

Due to the mains switch being located on the rear panel, the apparatus must be located in an open area without anything obstructing access to the mains switch.

FOR UK:

The mains lead is terminated with a moulded three pin plug.

Should the plug on the flexible cord not be of the type for your socket outlets do not use an adaptor but remove the plug from the cord and discard. Carefully prepare the end of the supply cord and fit a suitable plug.

The fuse must be replaced with one of the same rating.

IMPORTANT

The wires in this mains lead are coloured in accordance with the following code:

Blue:

Neutral

Brown:

Live

Yellow & Green:

Earth

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured Blue must be connected to the terminal which is marked by the letter N or coloured Black.

The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Red.

FOR EUROPE:

A mains lead compatible with national earthing standards and complying with the local safety requirement is supplied.

Page 1 Page 3
Page 2
Image 2
KEF Audio PSW2500 installation manual For UK
Page 1 Page 3

PSW2500 specifications

The KEF Audio PSW2500 is a high-performance subwoofer designed to elevate your home audio experience with its advanced technologies and features. Known for its exceptional sound quality and power, the PSW2500 stands out as an excellent choice for audiophiles and home theater enthusiasts alike.

One of the key features of the PSW2500 is its 10-inch high-efficiency woofer, which delivers deep, rich bass that enhances movie soundtracks and music. The woofer is designed to move air effectively, providing a remarkable low-frequency response that extends down to 25 Hz. This capability ensures that even the lowest notes are reproduced with clarity and power, making it perfect for both music and cinematic experiences.

The subwoofer is powered by an integrated 250-watt Class D amplifier, which is known for its efficiency and ability to deliver clean power. This amplifier is designed to complement the woofer, providing the necessary energy to produce strong and distortion-free bass, even at high volumes. The combination of the high-quality woofer and the powerful amplifier results in a subwoofer that can fill a room with immersive sound.

In terms of connectivity, the PSW2500 includes both line-level and speaker-level inputs, allowing for easy integration into a variety of audio setups. Whether you're connecting to a stereo system or a multi-channel home theater setup, the PSW2500 is designed to fit seamlessly into your existing configuration. The adjustable low-pass filter ensures that you can fine-tune the crossover frequency to match your main speakers, providing a cohesive soundstage.

Another notable characteristic of the PSW2500 is its sophisticated design. It features a sleek, modern aesthetic that complements contemporary home interiors. The sturdy cabinet construction minimizes unwanted vibrations, while the front-firing design allows for flexible placement options in any room.

The PSW2500 also includes phase control and adjustable volume settings, giving users the flexibility to customize their listening experience. Whether you prefer subtle background bass or a more pronounced low-end presence, the subwoofer can be tailored to suit your preferences.

Overall, the KEF Audio PSW2500 is a versatile and powerful subwoofer that promises to deliver an exceptional audio experience. With its high-efficiency woofer, powerful amplifier, and blend of connectivity options, it stands as an impressive addition to any home audio system, ensuring that every movie and musical performance is experienced just as the artist intended.
Top Page Image Contents