You can customize your wash by adding OPTIONS to your cycle selections. You can add or change an option after starting a cycle anytime before the selected option begins. Not all Options are available with all cycles.

OPTIONS

PREWASN

@

2ND RINSE

EXTENDED SPIN

See the "Laundry Guide" section for an overview of possible options for each Wash Cycle selection.

You can select more than one option for a cycle. Some options cannot be added to some cycles.

If an option is available with a selected cycle, the light for that option will glow when selected.

If an option is unavailable with a selected cycle, there will be a short tone, and the light for that option will not glow when selected.

Prewash

Use this option for loads of heavily soiled garments that need pretreatment.

Add detergent to the detergent compartment of the Dispenser Drawer.

This option adds tumbling time prior to the selected main cycle. The washer continues automatically from prewash into the main wash cycle.

2nd Rinse

A second rinse can be used to ensure the removal of detergent or bleach residue from garments. This option provides an additional rinse with the same water temperature as the first rinse.

Extended Spin

Use this option to add an additional spin to any cycle to improve the "fluff" of your laundry, to reduce drying time, and to save energy.

Preset cycle settings of Wash/Rinse Temp, Water Temp, Spin Speed, and Soil Level can be changed. You can change a modifier after starting a cycle anytime before the selected modifier begins. Not all Modifiers are available with all options and cycles,

MODIFIERS

AuTOTEMPCON7/_OL

O HIGH

 

 

® HOT! COLD

MEDUUM

 

 

O WARM /

WARM

LOW

HUGH

0 WARM

/

COLD

EXTRA LOW

e

Low

@ COLD / COLD

o

NO SPIN

@

OFF

 

 

 

 

0

0

WATER

TEMP

 

SPIN SPEED

END of

CYCLE SIGNAL

WASH /

RINS£

 

 

 

 

To change the water temperature, select the WATER TEMP button until the desired setting glows.

To change the spin speed, select the SPIN SPEED button until the desired setting glows.

® HEAVY

 

o NORMAL

:))))

 

o LIGHT

0

SOIL LEVEL

To change cycle time, select SOIL LEVEL button.

To change the loudness of the End of Cycle Signal, select END of CYCLE SIGNAL.

Wash/Rinse Temp

Select a water temperature based on the type of load you are

washing. Use the warmest water safe for fabrics. Follow garment label instructions.

Warm rinses leave the loads dryer than cold rinses. Warm rinses increase wrinkling. In cold climates, a warm rinse makes the load

more comfortable to handle. Cold rinses save energy.

Temperature

Guide

 

 

 

 

Wash Water

Temperature

Suggested

Fabrics

HOT

 

Whites

and

pastels

122°F (50°C) or above

Heavy

soils

 

 

WARM

 

Bright

colors

 

104°F (40°C)

 

Moderate to light

soils

COLD

 

Colors

that

bleed

or fade

77°F (25°C)

 

Light soils

 

 

In wash water temperatures colder than 70°F (21 °C), detergents do not dissolve weft. Soils may be difficult to remove.

15

Page 15
Image 15
Kenmore 110 manual Prewash, Temperature Guide, Temperature Suggested Fabrics, Hot