Kenmore 116.23512, 116.23513 To Remove Belt, To Clean Agitator, Clean a aitator, Every 2 months

TO REMOVE BELT

1. Turn Power-

Mate ® upside down.

2. Unscrew the

two (2) Power- Mate ® cover

screws.

3.Turn Power- Mate ® right

side up. Press handle release pedal and lower the swivel. Lift rear latches up.

4. To remove cover, grasp the sides and pull out.

5. Depress		tabs		Tabs
on rear	of
agitator	cover
and rotate
forward	to
release	from		the	Agitator
Power-Mate		®
				Cover
base.

6. Lift agitator assembly out and remove worn belt.

End Cap

7.Check and clean end cap areas. See AGITATOR ASSEMBLY for picture of complete agitator assembly.

TO CLEAN AGITATOR:

NOTE: In order to keep cleaning efficiency high and to prevent damage to your vacu- um, the agitator must be cleaned every time the belt is changed.

The agitator must also be cleaned accord- ing to the following schedule:

Vacuum	Use	Clean Aaitator
HEAVY	-	every week
(used	daily)
MODERATE -		every month
(used 2-3 times/week)
LIGHT	-	every 2 months

(used 1 time/week)

IMPORTANT

Disconnect cleaner from electrical outlet.

Check and remove hair, string and lint build-

up frequently in the Power-Mate ® agitator

and end cap areas.

Remove any dirt or debris in the belt path area or in the brush roller area.

Carefully remove any string or debris located on the agitator, or end caps.

Agitator Assembly

Brush Unit

End Cap 1

L_Belt Pulley

17