LP Tank Exchange

∙Many retailers that sell grills offer you the option of replacing your empty LP tank through an exchange service. Use only those reputable exchange companies that inspect, precision fill, test and certify their tanks. Exchange your tank only for an OPD safety feature-equipped tank as described in the “LP Tank” section of this manual.

∙Always keep new and exchanged LP tanks in an upright position during use, transit or storage.

∙Leak test new and exchanged LP tanks BEFORE connecting to the grill.

∙Place dust cap on cylinder valve outlet whenever the cylinder is not in use. Only install the type of dust cap on the cylinder valve outlet that is provided with the cylinder valve. Other types of caps or plugs may result in leakage of propane.

LP Tank Leak Test

For your safety

∙A leak test must be repeated each time the LP tank is exchanged or refilled.

∙Do not smoke during a leak test.

∙Do not use an open flame to check for gas leaks.

∙The grill must be leak tested outdoors in a well- ventilated area, away from ignition sources such as gas fired or electrical appliances. During the leak test, keep the grill away from open flames or sparks.

∙Use a clean paintbrush and a 50/50 mild soap and water solution. Brush soapy solution onto areas indicated by arrows in the figure below. Leaks are indicated by growing bubbles.

If “growing” bubbles appear, do not use or move the LP tank. Contact an LP gas supplier or your fire department!

▲Do not use household cleaning agents. Damage to gas valve/hose/regulator components can result.

Connecting Regulator To The LP Tank

1.LP tank must be properly secured onto the grill. (Refer to assembly section.)

2.Turn all control knobs to the OFF position.

3.Turn LP tank OFF by turning the OPD hand wheel clockwise to a full stop.

4.Remove the protective cap from LP tank valve. Always use cap and strap supplied with valve.

The regulator must enter the cylinder valve in a straight line.

Center this nipple of the regulator into the cylinder valve.

5.Hold regulator and insert nipple into the LP tank valve. Hand-tighten the coupling nut, holding regulator in a straight line with LP tank valve so as not to cross-thread the connection.

6.Turn the coupling nut clockwise and tighten to a full stop. The regulator will seal on the back-check feature in the LP tank valve, resulting in some resistance. An additional one-half to three-quarters turn is required to complete the connection. Tighten by hand only – do not use tools.

NOTE:

If you cannot complete the connection, disconnect the regulator and repeat steps 5 and 6. If you are still unable to complete the connection, do not use this regulator. Call 1-800-4-MY-HOME®for identical replacement parts.

The pressure regulator and hose assembly provided with this gas grill must be used. This regulator is set for an outlet pressure of 11 inches water column. Replacement pressure regulators and hose assemblies must be those specified in the parts list.

5

Page 4 Page 6
Page 5
Image 5
Kenmore 119.1614521 manual LP Tank Exchange, LP Tank Leak Test, Connecting Regulator To The LP Tank, For your safety
Page 4 Page 6

119.1614521 specifications

The Kenmore 119.1614521 is a versatile and efficient kitchen appliance that combines functionality with modern technology to enhance your cooking experience. This appliance stands out for its innovative features and user-friendly design. With a sleek and compact form, it fits seamlessly into a variety of kitchen styles while providing exceptional cooking capabilities.

One of the key features of the Kenmore 119.1614521 is its powerful cooking performance. It is equipped with multiple heat settings that allow for precise temperature control, giving users the ability to achieve perfect results whether they are baking, roasting, or broiling. Its large capacity makes it suitable for preparing meals for both small gatherings and larger family occasions.

The appliance also incorporates advanced cooking technologies that set it apart from traditional kitchen devices. One such technology is the convection cooking system, which circulates hot air throughout the cooking space. This ensures even heat distribution, resulting in thorough cooking and browning. As a result, users can enjoy dishes that are not only delicious but also visually appealing.

Another notable characteristic of the Kenmore 119.1614521 is its energy efficiency. Designed with energy-saving features, it minimizes power consumption without sacrificing performance. This makes it an eco-friendly choice for environmentally conscious consumers while also reducing electricity bills.

In addition to its cooking prowess, the Kenmore 119.1614521 is designed for ease of use and maintenance. The intuitive control panel is user-friendly, allowing even novice cooks to navigate its various settings with ease. Moreover, its non-stick interior ensures effortless cleanup, enabling users to spend more time enjoying their meals and less time scrubbing dishes.

Safety is also a priority in the design of the Kenmore 119.1614521. The appliance is equipped with multiple safety features, such as automatic shut-off and overheat protection, providing peace of mind during cooking sessions.

Overall, the Kenmore 119.1614521 is a well-rounded kitchen appliance that meets the demands of modern cooking. Its combination of powerful performance, innovative technology, energy efficiency, and user-friendly design makes it an ideal choice for anyone looking to elevate their culinary skills. Whether you’re an experienced chef or a beginner, this appliance is sure to enhance your kitchen experience.
Top Page Image Contents