Grill Lighting Instructions
1.Before each use, check all hoses for cracks,
| nicks, | cuts, | or | abrasions. | If | a | hose | is | ||||
| damaged | in | any way, | do | not | use | your grill | |||||
| before | replacing | the | hose | with | an |
| |||||
| authorized | part | from | the | Parts | List. | Also | |||||
| make | sure all | gas supply | connections | are | |||||||
| securely |
| tightened. |
|
|
|
|
|
| |||
2. | Familiarize | yourself | with | the | Safety | and | ||||||
| Use | and | Care | instructions | in | this | manual. | |||||
| Do | not | smoke |
| while | lighting | the | grill | or | |||
| checking |
| gas | supply | connections. |
|
|
| ||||
3.Be sure the LP gas tank has gas.
4.Open the grill lid.
Failure to replace a faulty hose, secure gas
supply connections, or to open the lid before
proceeding to the Lighting Procedures could
result in a fire or explosion that could cause
serious bodily injury, death, or property damage.
5.Set control knobs to OFF and open the LP gas tank valve SLOWLY.
O
Low
6.Push and turn any control knob to "Hi".
0
Low
7. Immediately press the electronic ignition button for
You should hear a clicking sound which
shows the electronic ignition is working. If
the burner does not light within 5 seconds,
turn the burner control knob to "OFF". Wait
5 minutes for the gas to clear, and repeat the above procedure.
8.Once one burner is lit, an adjacent burner
can be lit by turning its control knob to "Hi".
9.When lit, turn the control knob to its
desired setting.
Rotisserie | Burner | Electric | Ignition |
Main Burner
Side Burner and Rotisserie Burner
Lighting Instructions
1, Follow steps 1 through 3 of the Grill Lighting Instructions.
2.Open the grill lid or side burner cover.
3.Set control knobs to OFF and open the LP gas tank valve SLOWLY
4.Push and turn the control knob to "Hi".
5, Immediately press the electronic ignition button for
6, If the burner does not light within 5 seconds, turn the burner control knob to "OFF". Wait 5 minutes for the gas to clear, and repeat the above procedure.
7, Continue to press in and hold the rotisserie
burner control knob for 5 to 7 seconds
once lit to activate the safety flame sensor. Failure to do so will cause gas to be shut off to the rotisserie burner and the burner will go out.
Side Burner
22
