Sideburner

[] Loosenside burner in side shelf. (B). To loosen, unscrew and remove two front screws and

 

washers holding sideburner in place. (A).Note: Do not loosen electrode screw.

[]

Remove knob and bezel from sideburner control valve. To remove, pull knob straight out from

 

valve stem. Unscrew bezel from valve face and set the two screws aside.

 

[]

Insert valve stem through hole in fascia. (C). Attach bezel to fascia and valve

face with

 

previously removed 2 screws. (D)

 

 

[]

Place sideburner tube over the valve, making sure that valve

is inside sideburner tube. (E)

[]

Reattach sideburner to sideburner shelf with the 2 previously

removed screws

and washers.

[]

Pushcontrol knob onto sideburner valve stem.(F)

 

 

[]

Replace sideburner grate.(G)

 

 

[]

Connect both igniter wires to the igniter module on the inside of the right fascia. To connect,

 

push igniter wire tips onto pins in igniter module. (H)

 

 

[]

Unscrew igniter cap from control panel. Insert (1)AAA battery (not provided)

into battery slot

 

with positive end (+) facing outward. Screw igniter cap back onto panel. (I)

 

B

C

16153- 50300312 * 23

Page 23
Image 23
Kenmore 146.1615311 manual Sideburner