Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
Removing Cabinet
1.Unplug washer or disconnect power.
2.Remove 2 screws on console at left and right side on bottom.
A
NOTE: You do not have to disconnect the timer.
A. Access panel B. Clip
6.Remove washer cabinet clip inside meter case, using screwdriver.
7.Pull cabinet up and forward to remove.
Replacing Cabinet
1.Put cabinet in place on washer.
2.Replace clips at top rear of washer cabinet.
3.Put timer back in place in meter case and tighten timer bolts.
4.Replace meter case access panel,
5.Swing console down into place, push toward rear.
6.Replace 2 console screws.
7.Plug in washer or reconnect power.
NOTE: Place all screws and other items removed from coin slide assembly on a cloth so they will not get lost.
|
|
| A. Screws |
|
| |
3. | Pull console | forward then tilt | it back. |
|
| |
4. | Remove washer cabinet | clip | on right side under console. Use |
|
| |
| screwdriver | blade as shown. |
|
|
| |
| NOTE: For additional security, top can be locked to washer |
|
| |||
| with a lock and key in the hole provided. Screw type lock |
|
| |||
| available from industry | sources. | Electrical | Shock Hazard | ||
|
|
|
|
| ||
|
|
|
| Disconnect | power before servicing. | |
|
|
|
| Replace all parts and panels before operating. | ||
|
|
|
| Failure to do so can result in death or | ||
|
|
|
| electrical | shock. |
|
1. Unplug washer or disconnect power.
2. Remove slide mechanism from meter case.
A. | Clips | C. Screwdriver |
B. | Clip | blade |
5.Open top access panel in meter case. Loosen timer bolts with Phillips screwdriver and lift timer out of the way.
10
