EXTENSION WAND
PLACEMENT
Place the crevice tool (A) in the top of the extension wand. Place the
extension wand (B) in the wand holder on the side of the vacuum cleaner.
OPERATING iNSTRUCTiONS
iiiiiiiiii__]i_7!_.....!'_"!'!
1.The power switch is located on the side of the vacuum. Push the rocker
switch "ON" to vacuum, and "OFF" when cleaning is complete.
AWARNING
To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than
the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician
to install the proper outlet. Do not change the plug in any way.
2.Unclip the power cord plug from the power cord. Place the power cord into the cord clip on the body as shown. This helps keep the power cord
out from under the vacuum cleaner nozzle.
3.Plug the polarized power cord into a 120 Volt outlet located near the floor.
4.To store cord, turn upper cord wrap to the up position, then wrap cord.
AWARNING
Personal Injury and Product
Damage Hazard
*DO NOT plug in if switch is in the ON position. Personal injury or damage could result.
*DO NOT use outlets above counters. Damage from cord to items in surrounding area could
OCCUr.
