Installation
Instructions
Gas & Electric
Dryer
Before beginning installation, carefully read these instructions. This will simplify the installation and ensure the dryer is installed correctly and safely. Leave these instructions near the Dryer after installation for future reference.
NOTE: The electrical service to the Dryer must conform with local codes and ordinances and the latest edition of the National Electrical Code, ANSI/NFPA 70.
NOTE: The gas service to the Dryer must conform with local codes and ordinances and the latest edition of the National Fuel Gas Code ANSI Z223.1.
For your safety the information in this manual must be followed to minimize the risk of fire or explosion or to prevent property damage, personal injury or loss of life.
-Do not store or use gasoline or other flammable vapors and liquid in the vicinity of this or any other machine.
-WHAT TO DO IF YOU SMELL GAS
·Do not try to light any machine.
·Do not touch any electrical switch; do not use any phone in your building.
·Clear the room, building or area of all occupants.
·Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier's instructions.
·If you cannot reach your gas supplier, call the fire department.
Installation and service must be performed by a qualified installer, service agency or the gas supplier.
Contents
SUBJECT | PAGE |
2 | |
Electrical Requirements | 2 |
Exhaust System Requirements | |
Gas Supply Requirements | 3 |
Location of Your Dryer | 4 |
5 | |
Unpacking | 5 |
Reversing Door Swing | 5 |
Electrical Installation | 6 |
Grounding Requirements | 6 |
Electrical | 7 |
Electrical | 7 |
Installation | 8 |
Replacement Parts | 8 |
Lint Blade Retaining Pin Location | 8 |
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
Printed in U.S.A. | P/N 134313400 (0309) |
