OTHER THINGS TO KNOW

SECTION 4
18

4A. DIMENSIONS/SPECIFICATIONS

FIG. 12 BYPASS VALVES
A
B
C
D
E
F
INCHES CM
ASalt Tank Height 40-1/4 102.2
BResin Tank Diameter (nominal) 8 20.3
CResin Tank Height (nominal) 40 101.6
DInlet-Outlet Height 41-1/2 105.4
EOverall Height 46 116.8
F1Length 19-1/2 49.5
F2Width 16-1/2 41.9
—Distance between inlet-outlet
center lines 3-3/8 8.6

MODEL NO. 625.348420 TIMER SR CODE SR17

NOTE:

      !   "     !  

    "  "  

              

WATER SUPPLY TO WATER SOFTENER
MINIMUM WATER SYSTEM FLOW (gpm) 3
MINIMUM–MAXIMUM WATER PRESSURE (psi) 20-120
MAXIMUM WATER TEMPERATURE (°F) 120
MAXIMUM WATER HARDNESS (gpg) 90*
MAXMUM “CLEAR WATER” IRON (ppm) 3
SALT FOR WATER SOFTENER
TYPE OF SALT NEEDED Nugget/Pellet
ALTERNATE TYPE OF SALT Pure, evaporated, compacted
water softener salt
STORAGE CAPACITY (pounds) 200
*Do not exceed this number when setting hardness in step 2,
page 7. The maximum setting available is 95.
OTHERS
TYPE OF ION EXCHANGE MATERIAL (resin) High Capacity
AMOUNT OF RESIN (cu.ft.) .6
REGENERATION (RECHARGE) CYCLE TIME (min.)
FILL 2–8
BRINING/BRINE RINSE 103
BACKWASH 7
FAST RINSE 3
TOTAL REGENERATION TIME 115–121
gpm = gallons per minute psi = pounds per square inch
gpg = grains per gallon ppm = parts per million