Suggested Slab Foundation Installation
water heater kitchen
Plug the softener transformer
into an inside, 120 volt 60Hz
electrical outlet. Ifan outside
outlet is used, besure it has
approved weather protection.
WATER SOFTENER
(install in garage, car port,
or other sheltered area)
bathroom
outside
-soft
bypass
valve outside
-soft
Run drain tubing to laundry tubor
p-trap inside home, ifpossible.
Otherwise, run to a dry well.
outside
-hard
outside
-hard
water in
For outside hard
water, trench under-
ground as needed.

FIG. 4

DRAW IN YOUR PIPES

AND FITTINGS

Draw the plans for your "IN" and "OUT"
piping here. Include allpipe, fittings and
accessories you will use.
Make a list of all materials you will need
and buy them before you begin to install
the water softener.
120V - 60Hz U
Electrical
Outlet
Left
Valve Outlet Side
Valve Inlet
Your House Main Water Pipe
Right
*In what direction does the water flow?
Be sure to plan "IN" and "OUT" piping so water
flow is to the softener valve inlet. Plan a
crossover ifflow is from leftto right.
Raw
CROSS-OVER
Main Water Pipe
Outlet Inlet
Soft Water
To Water Softener

FIG. 5

Questions? Call The Kenmore Water Line 1-800-426-9345

8