Hi Temp Wash
Select this option to increase the water temperature during the wash portions of the cycle. Hi Temp Wash raises the water temperature to 145°F (63°C), in the main wash. Heating the water helps improve washing results. Hi Temp Wash is useful when loads contain
This option may add heat and wash time to the cycle.
NOTE: Hi Temp Wash is an option with the SMART WASH TM, Pots Pans, and Normal Wash cycles.
Sani Rinse
Select this option to raise the water temperature in the final rinse to approximately 155°F (68°C). Sani Rinse adds heat and time to the cycle. This high temperature rinse sanitizes your dishes and glassware in accordance with NSF/ANSI Standard 184 for Residential Dishwashers. Certified residential dishwashers are not intended for licensed food establishments.
NOTE: Sani Rinse is an option with SMART WASH TM, Pots Pans, and Normal Wash cycles. Only these sanitization cycles have been designed to meet the NSF/ANSl requirements.
Heated Dry
The Heated Dry option in combination with rinse aid will give you excellent drying results. The energy to use Heated Dry costs pennies per cycle. Heated Dry is on when the light is lit on the Heated Dry button. Be sure to load plastic items in the upper rack to avoid damage.
You may turn off the Heated Dry option by pressing HEATED DRY so that the light goes off. However, you will have items in your dishload that will not be dry at the end of the cycle.
NOTE: The Heated Dry option is used in all cycles except Quick Rinse.
Lock On
Use the Lock On to prevent unintended use of the dishwasher. You can also use the lock feature to prevent unintended cycle or option changes during a cycle.
When LOCK ON is lit, all buttons are disabled.
NOTE: The dishwasher door can be opened while the controls are locked.
To turn on the Lock
Press and hold AIR DRY for 4 seconds. LOCK ON glows.
If you press any pad while your dishwasher is locked, the light flashes 3 times.
To turn off the Lock
Press and hold AIR DRY for 4 seconds. The light turns off.
Delay Hours/4 Hour Delay
Select this option to run your dishwasher at a later time or during
The delay will not continue if the door is not latched. To delay the start
1.Press the delay button to choose the number of hours delayed.
2.Select a wash cycle and options.
3.Press START.
The dishwasher starts the cycle in the selected number of hours.
NOTES:
•To cancel the delay and cycle, press CANCEL.
•To cancel the delay and start the cycle, press START.
Follow the progress of your dishwasher with the Cycle Status indicators.
O | Q | • |
WASHINGDRYINGCLEAN
NOTE: The features on your dishwasher may vary from those shown here.
Sanitized
If you select the Sani Rinse option, Sanitized glows when the Sani Rinse cycle is finished. If your dishwasher did not properly sanitize your dishes, the light flashes at the end of the cycle. This can happen if the cycle is interrupted or the incoming water temperature is too low. The light turns off when you press any button or close the door.
Clean
Clean glows when a cycle is finished. The light turns off when you press any button or close the door.
(On top control models)
The active vent reduces the sounds from your dishwasher. The vent closes, after the cycle starts, to lock in sound. After the cycle finishes and the dishes cool for several hours, the vent opens. This prevents any water vapor from collecting on the countertop. Between cycles, the vent stays open for airflow, reducing the buildup of odors.
NOTE: There is a slight noise when the vent closes or opens. This is normal.
(On split control models)
The active vent reduces the sounds from your dishwasher. The vent closes, after the cycle starts, to lock in sound. The Active Vent opens when wash action ends and vapor is vented into room. Between cycles, the vent stays open for airflow, reducing the buildup of odors.
I1 % •
I • | % | • |
_1"1 ;! Z
NOTE: There is a slight noise when the cover closes or opens. This is normal.
IMPORTANT: The vapor is hot. Do not touch the vent during drying.
16
