Lock On
Use the Lock to prevent your dishwasher from accidentally being turned on. Use the Lock, also, to prevent accidental cycle or option changes during a cycle.
LOCK ON
When LOCK ON is lit, all buttons are disabled.
NOTES:
•The dishwasher door can be opened while the controls are locked.
•You can turn on the Lock while the dishwasher is running.
To turn on the Lock
Press and hold
LOCKON
for 4 seconds. LOCK ON glows.
If you press any pad while your dishwasher is locked, the light flashes 3 times.
To turn off the Lock
Press and hold AIR DRY for 4 seconds. The light turns off.
Delay Hours
Select this option to run your dishwasher at a later time or during
To delay the start
1.Close the door.
2.Select a wash cycle and options.
3.Press DELAY HOURS 1 time for a
HOURS
2 4 6
@
The number glows above Delay Hours. The dishwasher starts the cycle in the selected number of hours.
4.Press START.
NOTE: To cancel the delay, press CANCEL/DRAIN until all Delay Hours lights are off.
IMPORTANT:
•Operate your dishwasher only when you are at home.
•If your home is equipped with a water softener, do not start the dishwasher during the regeneration of the softener.
Follow the progress of your dishwasher with the Cycle Status indicators.
WASHING
HEATING
DRYING
CLEAN
Heating
HEATING glows, and the cycle progression pauses, whenever water is heated during a cycle. Wash or rinse action continues as the water heats.
Clean
CLEAN glows when a cycle is finished. The light turns off when you open the door or press Cancel/Drain.
During drying, you can see steam escaping through the vent at the upper left corner of the door. This is normal as the heat dries your dishes.
IMPORTANT."The vapor is hot. Do not touch the vent
during drying.
The overfill protection float (in the front right corner of the dishwasher tub) keeps the dishwasher from overfilling. It must be in place for the dishwasher to operate.
Check under the float for objects that may keep the protector from moving up or down.
14
