Kenmore 665.16837 Washing Special, Items, Drying System, Oveff lt Protection Float, Active Vent

Models: 665.16839 665.16832 665.15837 665.15834 665.16834 665.15832 665.15839 665.16837

1 20
Download 20 pages 21.48 Kb
Page 16
Image 16
Drying System

To delay the start

1.Close the door.

2.Select a wash cycle and options.

3.Repeatedly press

@

until you see the desired hours of delay in the display.

When the delay reaches 12 hours, the delay turns off. Press DELAY HOURS again to select a new number of delay hours.

4.Press START.

NOTE: To cancel the delay, press CANCEL/DRAIN until all Delay Hours lights are off.

IMPORTANT:

iOperate your dishwasher only when you are at home.

=If your home is equipped with a water softener, do not start the dishwasher during the regeneration of the softener.

Drying System

During drying, you can see steam escaping through the vent at the upper left corner of the door. This is normal as the heat dries your dishes.

IMPORTANT; The vapor is hot. Do not touch the vent during drying.

Oveff lt Protection Float

The overfill protection float (in the front right corner of the dishwasher tub) keeps the dishwasher from overfilling. It must be in place for the dishwasher to operate.

Cycle Status Indicators

Follow the progress of your dishwasher with the Cycle Status indicators.

oooo

SENSING HEATING SANITIZED CLEAN

Sensing

Your dishwasher senses the soil level on the dishes. Soil level

determines the length of some cycles, the amount of heat added to the wash or rinse, and the cycle needed for the load. SENSING

glows during the soil sensing parts of the cycle, Wash action continues while sensing occurs.

Heating

HEATING glows, and the cycle progression pauses, whenever water is heated during a cycle. Wash or rinse action continues as the water heats.

Sanitized

If you select the Sane Rinse option, SANITIZED glows when the Sane Rinse cycle is finished. If your dishwasher did not properly sanitize your dishes, the light flashes at the end of the cycle. This can happen if the cycle is interrupted. The light goes off when you open the door.

Clean

CLEAN glows when a cycle is finished. The light turns off when you open the door or press Cancel/Drain.

Active Vent

The Active Vent reduces the sounds from your dishwasher. The cover closes after the cycle starts. Filling and washing sounds are reduced. The Active Vent opens when wash action ends and vapor is vented into room.

NOTE: There is a slight noise when the cover closes or opens. This is normal.

Check under the float for objects that may keep the protector from moving up or down.

WASHING SPECIAL

ITEMS

If you have doubts about washing a particular item, check with the manufacturer to see if it is dishwasher safe.

Material

Dishwasher

Safe?/Comments

Aluminum

Yes

 

 

High water temperature and detergents

 

can affect finish of anodized aluminum.

Disposable

No

 

Aluminum

Do not wash throwaway aluminum pans

 

in the dishwasher. These might shift

 

during washing and transfer black marks

 

to dishes and other items.

Bottles and Cans

No

 

 

Wash bottles and cans by hand. Labels

 

attached with glue can loosen and clog

 

the spray arms or pump and reduce

 

washing performance.

Cast Iron

No

 

 

Seasoning will be removed and iron will

 

rust.

 

China/

Yes

 

Stoneware

Always check

manufacturer's

 

recommendations before washing.

Antique, hand-painted, or over-the-glaze patterns may fade. Gold leaf can discolor or fade.

16

Page 16
Image 16
Kenmore 665.16837 Washing Special, Items, Drying System, Oveff lt Protection Float, Cycle Status Indicators, Active Vent