Kenmore 721.66222 manual Operation, Question

Models: 721.66222

1 18
Download 18 pages 55.88 Kb
Page 16
Image 16

Questions and Answers

Operation

Question

Why is the oven light not on dudng cooking?

Why does steam come out of the air exhaust vent?

Will the microwave oven be damaged if it operates empty?

Does m=crowave energy pass through the viewing screen in the door?

Why does a tone sound when a pad on the control panel is touched?

Can my microwave oven be damaged if food is cooked for too long?

When the oven is plugged into the wall outlet for the first time, and it might not work properly. What is wrong?

Answer

There may be several reasons why the oven light is not on. Have you:

Set a cooking time?

Touched START?

Steam is normally produced dudng cooking. The microwave oven has been designed to vent this steam.

Yes. Never operate the oven empty or without the glass turntable.

No. The metal screen bounces the energy back to the oven cavity.

The holes (or ports) allow only light to pass through. They do not let microwave energy pass through.

The tone tells you that the setting has been entered.

Like any other cooking appliance, it is possible to overcook food to the point that the food creates smoke and even possibly fire, and damage to the inside of the oven. It is always best to be near the oven while you are cooking.

The microcomputer controlling your oven may temporadly become scrambled and fail to function as programmed when you plug in for the first time or when power resumes after a power interruption. Unplug the oven from the 120 volt household outlet and then plug it back in to reset the microcomputer.

Why do I see light reflection around the outer case?

What are the vadous sounds I hear when the microwave oven is operating?

This light is from the oven light which is located between the oven cavity and the outer wall of the oven.

The clicking sound is caused by a mechanical switch turning the microwave oven'smagnetron ON and OFF.

The heavy hum and clunk is from the change in power the magnetron draws as it is turned ON and OFF by a mechanical switch.The change in blower speed is from the change in line voltage caused by the magnetran being turned ON and OFF.

16

Page 16
Image 16
Kenmore 721.66222 manual Operation, Question