Kenmore 790.3693 manual Control Pad Functions, InteriorlightONor, Thevariablebroil

Control Pad Functions

READ THE iNSTRUCTiONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with the various functions of the oven as described below,

	CLOCK	SET	COOK TIME
	PAD--	Used	PAD--	Used to
	to set the		enter	the length of
	time of day.		the baking time.
				\
OVENiNTERiOR		_		_
				\
LIGHT	PAD--	_		k
Usedtoturnoven				\
interiorlightONor			_	_"
OFF.	_		_	_

_._

UP and DOWN ARROW PADS--

Used

BAKE PAD--Used

FEATURE

iNDiCATOR

along

with the function

pads

to select

oven

to select

the

bake

LIGHTS--

These light to

temperature,

cook time,

start

time

(when

function,

show

which

feature

is in

programming

an automatic

start time),

time of

J

use.

day, clean time and minute

timer.

I

/

BROIL

PAD--

_

I

_

Used to select

\

I

/

thevariablebroil

\

I

/

/

function.

\

I

/

\"

_k

_

f

I"

"

/

WARM

& HOLD

_ ,

_

I

_

Time

_

_

[

poke

I

Bro _

PAD--

Used

to set

the Warm & Hold

				•	•
PAD--	Used to	--	/	Select	Timer
SELECT CLEAN				Clean	I Set/Off I
select	the Self-
or
2, 3	4 hour Self-
Clean	time may be

selected.

•• OVEN

Delay	Q PREHEAT
		_(__
Start	• DOOR LOCKED	o....
		LOCKOUT

feature.

STOP PAD-- Used to clear any function

except the time of day and minute timer. Press STOP to stop cooking. Also the

TIMER SET/OFF PAD-- Used to set or cancel the minute timer. The minute timer does not start or stop cooking. Also,

TIMER SET/OFF pad is used to set the Continuous Bake featu re.

DE LAY START PAD-- Used to set the desired start time for baking &

Self-Clean. May be used with COOK

TIME to program a delayed bake cycle.

OVEN, PREHEAT & DOOR LOCKED LIGHTS* -- The "OVEN" light will glow each time the oven turns on to maintain the set oven temperature. The "PREHEAT" light will glow when the oven is first set to operate, or if the desired temperature is reset higher than the actual oven temperature. The "DOOR LOCKED" light will flash when the oven door locks and unlocks or when using the Self-Clean cycle or when the oven lockout is activated. The indicator light will glow constantly after the door locks.

STOP pad is used to activate oven door

lockout setting.

*Note: The OVEN indicator light on the electronic display will turn ON and OFF when preheat. This is normal and indicates that the oven is cycling to maintain the selected

heat indicator light turns OFF, your oven has reached the set temperature.

using the Bake feature and during baking temperature. When the pre-

For a silent control panel

When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed

for silent	operation. Press and hold	After 5 seconds,	the control	will beep once. This will block the controls		from
sounding	when a pad is pressed. To return	to normal sound	operation,	press and hold	again for 5 seconds	until the
control beeps once.

Temperature conversion

The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed for any temperature from 170°F to 550°F (77°C to 287°C).

To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):

1.Press _roil. "----" appears in the display.

2.Press and hold the A until "HI" appears in the display.

3.Press and hold _roil until °F or °C appears in the display.

4. Press the A or V to change °Fto °C or °C to °R

5.Press any control pad to return to normal operating mode.

12