![](/images/new-backgrounds/1093352/9335221x1.webp)
REVERSE FREEZER DOOR
°Gently pry off the Top Hinge Cover with a flat head screwdriver and remove (see Fig.13).
Fig. 13
Using 10mm or
Fig. 14
Top Hinge
Lift up door slightly and remove it (Fig. 15).
Fig. 15
Middle Hinge Bracket _
Hinge Pin
Turn freezer door upside down on a
Closer/Stop and Hinge Pin insert (see Fig. 16).
Fig. 16
Door Closer / Stop
•Move the Hinge Pin insert Bracket to the other side of the door, keeping the same orientation, and move the Hinge Pin insert into the hole on the left side
of the bracket (Fig. 17).
Fig. 17
i_ | Hinge Pin tnsert | |
| Hinge | Pin |
| insert | Bracket |
Reverse Door Closer/Stop by flipping over (see Fig. 18), place on top of Hinge Pin insert Bracket, and tighten both down with the screw.
Fig. 18 | (_ |
•Pry off cover on top of refrigerator on left side to uncover screw holes (Fig. 19).
•Set freezer door and Top Hinge parts to the side and remove refrigerator door.
Fi- 1_' | Cover | |
Y" _ |
| (on top of |
_ | i | refrigerator) |
|
|
&
11