HOW TO USE
CYCLE OPTIONS AND SPECIAL FEATURES
Your dryer features several additional cycle options and special features to meet your individual needs.
WRINKLE GUARD
Selecting this option will tumble the clothes after the cycle ends for a few
seconds every few minutes without heat. This option is active for 150
minutes after the end of the cycle, or until the door is opened. This helps prevent wrinkles if the clothes are not removed immediately after the cycle has finished.
DAMP DRY SIGNAL
If you press the Damp Dry Signal, the dryer will emit a chime when the
clothes are just short of completely
dry, in case you want to remove them for ironing or hang drying.
CONTROL LOCK
Use this option to disable the
controls. The Control Lock can only
be activated during a cycle. When the controls are locked “CL” will
display alternately with the estimated time remaining. If Wrinkle Guard is not activated when the controls are locked, the LED will blink. Once set, the Control Lock must be turned off before the controls can be used.
Press and hold the TOUCH UP button for five seconds to lock or unlock the controls.
MY CYCLE
My Cycle allows you to store a
customized dry cycle for future use. It allows you to save favorite temperature, dry level, and other options for a cycle,
and then recall them at the touch of a button.
NOTE: Only one My Cycle can be saved at a time. Press and hold the MY CYCLE button to overwrite any previ- ously saved cycle.
To save a MY CYCLE:
1Press the POWER button to turn on the dryer.
2Turn the cycle selector knob to select the desired cycle.
3Press the CYCLE MODIFIER button to change the desired setting.
4Press the CYCLE OPTION button to add the desired options.
5Press and hold the MY CYCLE button.
To recall a MY CYCLE:
1Press the POWER button to turn on the dryer.
2Press the MY CYCLE button. The stored settings will be displayed.
3Press the START/PAUSE button to start the cycle.
NOTE: My Cycle can be adjusted the same as any other cycle. However, once any other button is pressed, the LED will turn off, indicating that the settings are no longer those of your saved cycle.
25
