Kenmore 8907 manual Wrinklerq Pr6venti0ndu, Temp Selection Button, Mixed Load Bell

Models: 8907

1 26
Download 26 pages 55.92 Kb
Page 17
Image 17

II

Temp Selection Button

To select the correct temperature for the load, press the Temp button. An indicator light will illuminate next to the desired temperature. Press the button repeatedly to scroll through the settings.

O

Temperature

Telnp&atule

[] High - For sturdy cottons or those labeled Tumble Dry.

[] Medium - For permanent press, synthetics, lightweight cottons, or items labeled Tumble Dry Medium.

[] Low - For heat sensitive items labeled Tumble Dry Low or Tumble Dry Warm.

[] Extra Low - Provides the lowest heated dry temperature possible.

Time Selection Button

When using Manual Dry cycles, time can be adjusted by pressing the time selection button.

During the Sensory Dry cycle, the time light indicator is off because exact drying times are determined by fluctuating humidity levels.

©

Time

Temps

Cycle Signal Selection Button

When the cycle is complete, a chime will sound.

When the Wrinkle Guard option is selected, the chime will sound intermittently.

Adjust the volume of the chime or turn it off by pressing the Signal button.

Press the button repeatedly to scroll through the choices.

©

CycleSignal

Sign4 te i)r0_ramme

Adjust Time

Time can be added or subtracted from the automatically set times in the Manual Dry cycles (Time Dry, Air Fluff cycles).

To add or subtract time from the cycle, press the Adjust Time arrow pad up or down until the desired time is displayed.

_AjusL

du temps

dtl temps aju_

WrinMe Guard

Wrinkle Guard provides approximately 90 minutes of intermittent tumbling in unheated air at the end of the cycle to reduce wrinkling. Press the Wrinkle Guard button to activate this feature.

The indicator light above the pad will illuminate when Wrinkle Guard is selected.

The load is dry, and can be removed at any time during the Wrinkle Guard cycle.

f-'---------m

Wrinklerq Pr6venti0ndu

Guard fr0issemeUnt

Mixed Load Bell

This is an alarm that notifies the user when the average dry level is damp dry (80% dried). This is useful when the laundry contains various types of clothing you do not want

to dry completely. An alarm sounds for five (5) seconds while continuing to perform the cycle.

This function can only be selected in the Sensor Dry course, and the dry level can only be selected from among Normal Dry, More Dry, and Very Dry.

Brass6e

mlxte

Rack Dry

Rack Dry is available at Time Dry cycle. Temperature will be set only to Extra Low. (See next page for detail.)

When the cycle is complete, a chime will sound.

When the Wrinkle Guard option is selected, the chime will sound

intermittently.

Suppo_de

s6chage

Start/Pause selection Button

Press to pause and restart programs.

Start / Pause

Delnarrelt Pause

Power button

Press once to turn your Dryer on, press again to turn it off. If your dryer is left on for more than 10 minutes without any buttons being touched, the power automatically turns off.

Power

Mke en Marche

@

17

[BETTER]592-89075-02865

A-02 EN.indd

17

2011-03-23

_,_ft

9:49:24

I

 

 

 

Page 17
Image 17
Kenmore 8907 manual Wrinklerq Pr6venti0ndu, Temp Selection Button, Mixed Load Bell