Surface Cooking
Using proper cookware
CORRECTINCORRECT
The size and type of cookware used will influence the setting needed for best cooking results. Cookware should have flat bottoms that make good contact with the entire surface heating element (See Fig. 1). Check for flatness by rotating a ruler across the bottom of the cookware (See Fig. 2).
Cookware Material Types
The cookware material determines how evenly and quickly heat is transferred from the surface element to the pan bottom. The most popular materials available are:
ALUMINUM - Excellent heat conductor. Some types of food will cause it to darken (Anodized aluminum cookware resists staining
&pitting). If aluminum pans slide across the ceramic cooktop, they may leave metal marks which will resemble scratches. Remove these marks immediately.
COPPER - Excellent heat conductor but discolors easily. May leave metal marks on ceramic glass (see Aluminum above).
•Flat bottom and straight sides.
•Tight fitting lids.
•Weight of handle does not
tilt pan. Pan is well balanced,
•Pan sizes match the amount of food to be prepared and the size of the surface element.
•Made of a materia} that conducts heat well.
•Easy to clean.
®Always match pot diameter to surface element diameter•
Fig. 1
o Curved and warped pan bottoms.
o Pan overhangs element by more than
v
•Pan is smaller than element.
® Heavy handle tilts pan.
STAINLESS STEEL - Slow heat conductor with uneven cooking results. Is durable, easy to clean and resists staining.
CAST IRON - A poor heat conductor however will retain heat very well. Cooks evenly once cooking temperature is reached. Not recommended for use on ceramic cooktops.
GLASS - Slow heat conductor. Not recommended for ceramic cooktop surfaces because it may scratch the glass.
Be sure to follow the recommendations for using proper cookware as illustrated in Figs. 1 &
2.For more information about the ceramic cooktop see "Cooktop Cleaning & Maintenance" in the
General | Care & | Fig. 2 |
Cleaning | section. |
|
