Air Conditioner

Features

 

 

 

 

 

 

 

 

 

 

 

 

 

(continued)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TO USE AUTO COOL

FEATURE:

YOU WILL SEE:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LIGHT On

 

 

 

 

 

 

 

 

DO

THIS:

 

 

 

 

 

 

 

 

 

 

 

 

 

PRESSAUTO

 

Note: Fan speed starts at high and adjusts to a

 

 

 

slower

speed

as

the

room

temperature

 

dictates.

 

For

COOL

 

 

 

 

example, if the room doesn't get too warm it will stay at the

 

 

 

 

 

 

slowest

speed.

If

the room

temperature

 

rises

quickly,

such

 

 

 

as a door being

opened,

it

will automatically

go

to

the

 

 

 

highest speed. The fan speeds will readjust back to the

 

 

 

slowest

speed

as

the

room

 

returns

to

the

original

set

 

 

m

temperature.

Press either

the

Fan Slower

or

Fan Faster button

to

 

 

adjust the fan speed manually.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TO OPERATE ON FAN ONLY:

DO THIS:

PRESS

MODE BUTTON

/

JCHOOSE FAN ONLY

TO USE THE

POWER SAVER FEATURE:

DO THIS:

PRESS

_ MODE BUTTON

S ...........CHOOSE

YOU WILL SEE:

LIGHT

On

 

 

 

 

 

 

_Note:

Use

this function

only when

cooling

is

not

desired,

such as for room air circulation or to exhaust stale air.

You can choose any fan speed you prefer.

 

 

 

During

this

function, the display will

show

the

actual room

temperature,

not the

set temperature

as

in

the

cooling

mode.

 

 

 

 

 

 

 

 

YOU WILL SEE:

On

Note: In this mode, the fan will continue to run for 3 minutes after the compressor shuts off. The fan then cycles on for 2 minutes at 10 minute intervals until the room temperature is above the set temperature, at which time the unit turns back on.

_i®_ii i_!_¸ii

@POWER SAVER

Page 6
Image 6
Kenmore Air Conditioner owner manual To USE Auto Cool Feature YOU will see, To USE Power Saver Feature