Operations
English
Changing the Transmission Frequency
1To set the frequency change modePress the REP button for at least three seconds. The FREQ indicator will light up and the currently set frequency will be displayed.
F R E Q
M H z
NOTE
•The initial value is 88.3MHz.
•If this function is on, the functions other than power on / off, reset, and modulation level / dynamic control, cannot be operated.
•This function is not available when the random play, repeat play, or scan play function is on. Before using this function, cancel the other functions. This function cannot be used while loading a disc (while the play indicator is blinking).
2To change the frequencyPress either the 4 or ¢ button.
Each time you press the 4 or ¢ button, the mode switches as follows :
|
|
|
|
|
|
|
|
|
|
|
→ |
|
|
|
|
| → |
|
| ||
87.7MHz |
|
|
| 89.9MHz | ||||||
→ | → |
|
|
| → | → | ||||
87.9MHz |
|
|
| 89.7MHz | ||||||
→ | → |
|
|
| → | → | ||||
88.1MHz |
|
|
| 89.5MHz | ||||||
→ | → |
|
|
| → | → | ||||
88.3MHz (initial value) | 89.3MHz | |||||||||
→ | → |
|
|
| → | → | ||||
88.5MHz |
|
|
| 89.1MHz | ||||||
→ | → |
|
|
| → | → | ||||
88.7MHz |
|
|
| 88.9MHz | ||||||
|
| → |
|
|
|
|
| → | ||
|
|
|
|
|
|
| ||||
|
|
| ¢ |
|
|
| ||||
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
| ¢ |
|
|
|
|
| |
|
|
|
|
|
|
|
|
| ||
NOTE
Some car radios cannot receive a 87.7 MHz frequency.
To cancel :
Press the REP button on the display unit for at least three seconds.
The FREQ indicator will go off and the frequency change will take effect.
The frequency change mode is automatically canceled if you do nothing for 15 seconds.
— 12 —