For C-V351

Setup of the Graphical Remote Control (GRC) unit

C-V351/C-V301 (EN)

12Setting up the GRC according to your AV CONTROL CENTER (Model Type Setup)

Perform the following procedure after inserting batteries for the first time and every time after changing them.

Preparation

÷ Press the

(ON/STANDBY) key

 

of the main unit to the ON mode.

ENTER

VOLUME

Model Type Setup

Model 1

Model 4

Model 2

Model 5

 

MUTE

Model 3

Model 6

ON/STANDBY

 

 

 

Main operation menu

Model Type Setup (GRC setup procedure)

 

1Loading batteries

 

 

Caution in battery replacement
1 Remove the cover.2 Insert batteries.3 Close the cover.

÷ Insert four AA-size (R6/AA) batteries

 

 

 

as indicated by the polarity marking.

1

 

 

÷ To maintain the memory of the settings you

 

 

made before, complete the battery replace-

2

 

 

 

 

ment operation within 30 seconds.

3

 

 

÷ The procedure on the left should also be per-

 

 

formed when resetting the GRC (as a measure

 

 

 

 

 

 

against its malfunction). However, in this case,

 

 

 

wait for about five minutes after removing the

 

 

 

batteries and before re-inserting them.

2Check the display.

The “Model Type Setup” screen ap- pears.

Model Type Setup

Model 1

Model 4

Model 2

Model 5

Model 3

Model 6

3Select "Model 2."

Move the cursor.

It can be moved in 8 directions depending on how you press the joystick key.

ENTER

The icon on which the cursor is moved blinks in reverse video.

4Enter the selection.

Press the ENTER key.

ENTER

AV CONTROL CENTERGRC
Model“Model Type Setup” icon

C-V301 ...............................................

Model 2

C-V351 ...............................................

Model 2

To reset GRC setting

1 Select Set Up.

Set Up

2 Press the ENTER key.

ENTER

3 Select Reset.

Reset

4 Press the ENTER key.

ENTER

5Perform the setup procedure from step ”2 Check the display”.

÷The above operation clears all of the previously made settings and resets the unit to the initial condition.