15
Setup of the Graphical Remote Control (GRC) unit
In the operations of the GRC (Graphical Remote
Control unit), proceed to each step within 10
seconds after the previous step.
The display disappears in 10 seconds.
To resume GRC display, move the Joy-
stick in any directions.
Setting up the GRC according to other components (Set Up)
In the initial condition, the setup codes for CD, MD and DVD
have already been pre-registered. The GRC can also be used
to remote control other components which are not con-
nected through system control cords.
Registering setup codes for VIDEO 1
Enter the setup code.
1Select the ”SET UP“ icon.
1
2Select the ”Preference“ icon.
3Press the ”IR“ icon.
4Press the ”Input“ icon to open the list of available jack
sets.
5Press the “Device” icon to select the type of device you
have connected to the jack set.
6Press the “Brand” icon to select the device’s brand.
Continued to next page
1CD
2MD/TAPE 1
3VIDEO 1
4VIDEO 2
5DVD/DVD 6CH
6TV 1
7TV 2
8TAPE 2/MONI.
Select the icon with or .
1CD
2TAPE
3MD
4VCR
5CABLE
6SATELLITE
7TV
8LD
9DVD
0Nothing
Select the icon with or .