17
Setup of the Graphical Remote Control (GRC) unit
5Repeat steps 2 through 4 until you have taught GRC all the
commands you want it to know. If you need more lines,
touch or to access more lines.
4Assign a name to the function.
2Press the “Modify” icon.
3Press the or icon to select one of
“Empty 1 to 8”.
1Repeat steps 1 and 2 in “To program STOP as a new
control item”. ^
5Aim the device’s remote at GRC and press and hold the
button on the device’s remote that corresponds to the
command you want GRC to learn.
10 cm
÷Touch to access to lowercase characters. Touch it again to
access special characters (such as @, !, &, etc.). Touch it a third time
to return to uppercase characters.
÷Touch or to move back and forth between the characters.
÷Touch BS (Backspace) to clear the last caracter you entered. Touch
ALL DEL to delete all the characters in the line.
÷The name can be composed using up to 8 characters.
÷This may take a few seconds; do not move GRC or the device’s remote
until GRC displays the Function change menu again.
÷Be sure to use the device’s original remote. GRC will not learn
commmands from other universal remotes.
6Repeat steps 2 through 5 until you have taught GRC all the
commands you want it to know. If you need more lines,
touch or to access more lines.
÷The additionally programmed function is registered in the area.
Programming an additional function which is not dis-
played in the screen