— 23 —
Disc source
?CD play does not start.52
✔CD auto-changer input is not connected to the unit.
☞Connect the CD auto-changer input to the unit.
✔Power button is not turned ON.53
☞Turn the power button ON.
?The specified disc does not play, but another one plays instead.52
✔The specified CD is quite dirty.
☞Clean the CD.
✔The CD is upside-down.53
☞Load the CD with the labeled side up.
✔The disc is loaded in a different slot from that specified.54
☞Eject the disc magazine and check the number for the specified disc.
✔The disc is severely scratched.55
☞Try another disc instead.
?The specified track will not play.58
✔Random play or magazine random play has been selected.
☞Turn off random play or magazine random play.
?Cannot play CD-R or CD-RW.60
✔Finalization processing is not being conducted for CD-R/CD-RW.
☞Conduct finalization processing with CD recorder.
?Direct Track Search and Direct Disc Search can’t be done.66-1
✔Another function is ON.
☞Turn Random Play or other functions OFF.
?Track Search can't be done.66-2
✔For the discs first or last song.
☞For each disc, Track Search can't be done in the backward direction
for the first song or in the forward direction for the last song.
?Sound skips due to vibration.67
✔Something is touching the CD auto-changer.
☞Keep it away from the CD auto-changer.
✔The disc is dirty or damaged.68
☞If sound skips at the same part, the disc is faulty. Check and, if
possible, clean the disc.
✔Changer unit is mounted on the a slant.69
☞Mount the unit so that is level.
✔Changer unit is mounted in an unstable place.8
☞Mount the unit in a stable place.
✔The angle adjustment switches are set improperly.69
☞Set the angle adjustment switches to the correct positions.
?Sound quality is poor.67
✔The recording of the disc is poor.
☞Try playing another disc. If the sound is good, the fault was with
the original disc.
✔The disc is dirty or damaged.8
☞Check and, if possible, clean the disc.
?No sound is heard even though the information concerning the CD
auto-changer is displayed.67
✔The radio volume is sets to the minimum level.
☞Turn the radio volume up.
✔The microcomputer does not function correctly.68
☞Press the Reset button of the display unit. (Page 3)
✔The system is not connected properly.69
☞Connect the system properly. See <Connecting Wires to
Terminals>. (Page 20)