Preparation
18
Disc replacement
Discs can be replaced with the same procedure as “Loading discs in the carousel”. In stopped condition, all discs can be exchanged. However, when the disc door is opened while “DISC DETEC- TION” is being displayed, it may not be possible to remove the disc which had been played. Accordingly, wait for the “DISC DETECTION” indication to go out before opening the disc door. When the disc information has been read in at the time of registration of disc information like title, music type, etc., the disc information can be recalled even when the disc insertion place
is changed. | ª |
4Close the disc door.
÷When a title has been registered and the disc door is closed, reading operation is performed automatically.
The display flashes.
DISCCDETECTION3N
Chapter 3
The disc information for all discs will be read. We recommend to execute this mode before playback after discs have been exchanged. Close the disc door before operation.
1Press the MODE button.
MODE
2Select “ALL DATA READ”.
DISC SKIP
DOWN UP
3Set the input.
SET
To display the title on a LCD remote control unit (provided with a KENWOOD Receiver or optional), perform the all data read operation first, and operate the LCD remote control unit with the door left closed. For the operation of the LCD remote control unit, refer to the instruction manual provided with your receiver or LCD remote control unit.
Each press switches the modes as follows:
1 MUSIC TYPE
2USER FILE
3 DISC SEARCH
4 TITLE INPUT
5 ALL DATA READ
6 ALL INFORMATION
ALL DATA READ
Search in progress or |
|
reading information | The display flashes. |
DISC READING
When the disc is
D001 : CD TEXT
÷Repeat the above procedure so that the complete disc information is read into the CD player.
÷In the case of a
To quit ALL DATA READ mode
Press the 7 button.
1. Please remove all CDs from the carousel before moving the unit.
Notes 2. If blinking “PLEASE WAIT” is displayed when the disc door is opened, do not attempt to change the disc.