Connecting to Other Devices
To Connect the Changer to a Kenwood Receiver
1.Unplug the receiver from the wall outlet or power strip.
2.Connect the audio cable from output on the CD changer to the receiver as shown to the left. If you are connecting the CD changer to a receiver that supports listening (such as the
3.Connect an optional optical digital cable from the changer to the receiver as shown to the left. If your receiver does not support digital output, skip this step.
If you do not connect a digital cable or if your receiver does not support digital output and DTS decoding, DTS discs do not play on your changer.
4.Connect the system control cable from the changer to the receiver jack as shown to the left. If your receiver has the SL16/XS8 mode select switch, set the connected receiver to the [SL16] mode. If you are connecting more than one Kenwood device with a system control cable, see “What If I Have Several Kenwood Devices ?” for more information.
8
5.Connect the SL16 text cable (communication cable) from the changer to the receiver’s jack as shown to the left.
6.Plug the changer’s power cable into a wall outlet or power strip.
7.Plug the receiver’s power cord back into a wall outlet or power strip.
To Connect the Changer to a Non-Kenwood Receiver or Preamplifier
1.Unplug the receiver or pleamplifier from the wall outlet or power strip.
2.Connect the audio cable(s) from output on the CD changer to the receiver or pleamplifier as shown to the left.
3.Connect an optional optical digital cable from the changer to the receiver as shown to the left. If your receiver does not support digital output and DTS decoding, skip this step. If you do not connect a digital cable or if your receiver does not support digital output, DTS discs do not play on your changer.
4.Plug the changer’s power cable into a wall outlet or power strip.
5.Plug the receiver’s power cable back into a wall outlet or power strip.
To Connect the Digital Output Directly to a Digital Recorder (MD, DAT, etc.)
If your receiver does not support digital output, but you want to record discs to a digital format, you can connect the CD changer directly to a digital recording device, such as an MD or DAT recorder.
1.Unplug the digital recorder from the wall outlet or power strip.
2.Connect the digital cable from the changer to the recorder.
3.Plug the changer’s power cable into a wall outlet or power strip.
4.Plug the recorder’s power cable back into a wall outlet or power strip.
Malfunction of microcomputer
If operation is not possible or erroneous display appears even though all connections have been made properly, reset the microcomputer
referring to “In case of difficulty”. | q |
In regard to PC LINK function
By connecting a PC to the CD player, disc and track title data can be downloaded from an
Software
To use this function, download its software from the following WWW site: http://www.kenwoodusa.com
Connection cable
Connect the CD changer to the PC using an
CD changer side connector | – |
PC side connector | – Use a cable equipped with a connector matching the computer in use. |
Use a Reverse type cable in the connection between the CD changer and PC. The PC LINK function is not available if a Straight type cable is used.
PC operating environment
This program has been designed to run on a PC which runs the Microsoft Windows 95 or Windows 98, uses a Pentium or newer CPU and has a free memory space of 32 MB or more.
Windows 95 and Windows 98 are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
7
1 Chapter