Connection
|
| If you connect the ignition wire (red) and the battery |
|
| wire (yellow) to the car chassis (ground), you may |
Ignition key |
| cause a short circuit, that in turn may start a fire. Always |
switch |
| connect those wires to the power source running |
|
| through the fuse box. |
ACC | A |
|
| B | Ignition wire (Red) |
| A |
| Car fuse box |
Car fuse box | B |
(Main fuse) |
|
C
C
+–
Battery
Battery wire (Yellow)
Ground wire (Black) - (To car chassis)
Antenna Cord
Connect to the vehicle's parking brake detection switch harness.
Parking sensor wire (Light Green)
PRK SW | For the sake of safety, be sure to connect the parking sensor. |
|
Reveres sensor wire (Purple/White)
Connect to vehicle's reverse lamp harness when using the optional rear view camera.
Steering remote control input
(Light Blue/Yellow)
To steering remote
To use the steering wheel remote control feature, you need to an exclusive remote adapter (not supplied) matches your car is required. When this terminal is not in use, leave its cap on.
To car light control switch
Connect to the terminal that is grounded when either the telephone rings or during conversation.
To connect the Kenwood navigation system, consult your navigation manual.
Depending on what antenna you are using, connect either to the control terminal of the motor antenna, or to the power terminal for the booster amplifier of the
When using the optional power amplifier, connect to its power control terminal.
Dimmer control wire (Orange/White)
Mute wire (Brown)
Motor antenna control wire (Blue)
Power control wire (Blue/White)
If no connections are made, do not let the cable come out from the tab.