Connecting Wires to Terminals
Connector Function Guide
Pin Numbers for | Cable Colour | Functions |
ISO Connectors |
|
|
External Power |
|
|
Connector |
|
|
Yellow | Battery | |
Blue/White | Power Control | |
Orange/White | Dimmer | |
Red | Ignition (ACC) | |
Black | Earth (Ground) | |
|
| Connection |
Speaker |
|
|
Connector |
|
|
Purple | Rear Right (+) | |
Purple/Black | Rear Right | |
Gray | Front Right (+) | |
Gray/Black | Front Right | |
White | Front Left (+) | |
White/Black | Front Left | |
Green | Rear Left (+) | |
Green/Black | Rear Left |
2WARNING
Connecting the ISO Connector
The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make sure to make the proper connections to prevent damage to the unit.
The default connection for the wiring harness is described in 1 below. If the ISO connector pins are set as described in 2 or 3, make the connection as illustrated.
Please be sure to reconnect the cable as shown 2 below to install this unit to the Volkswagen vehicles etc.
1(Default setting) The
Ignition cable (Red) | |
Unit | Vehicle |
Battery cable (Yellow) |
2The
Ignition cable | |
(Red) | |
Unit | Vehicle |
Battery cable | |
(Yellow) |
|
3The
Ignition cable (Red) | |
Unit | Vehicle |
Battery cable (Yellow) |
⁄
•When the connection is made as in 3 above, the unit’s power will not be linked to the ignition key. For that reason, always make sure to turn off the unit’s power when the ignition is turned off.
To link the unit’s power to the ignition, connect the ignition cable (ACC...red) to a power source that can be turned on and off with the ignition key.
6 DDX5022/DDX5022Y/DDX52RY