You can set a crossover frequency of speakers.
(Page 50 4)
X'Over setup screen
X ' O v e r
| HPF Front FREQ | |||
1 |
| 2 2 0 H z |
| |
| HPF Rear FREQ | |||
2 |
| 1 8 0 H z |
| |
3 | LPF SUB FREQ | |||
| 1 2 0 H z |
| ||
4 |
| |||
SUB Phase | N o r m a l | |||
5 Re t u r n
1 Sets a Front High Pass Filter frequency.
You can select any of the following frequency. Through, 40, 60, 80, 100, 120, 150, 180, 220 Hz
2 Sets a Rear High Pass Filter frequency.
You can select any of the following frequency. Through, 40, 60, 80, 100, 120, 150, 180, 220 Hz
3 Sets a Subwoofer Low Pass Filter frequency. You can select any of the following frequency. 50, 60, 80, 100, 120, Through Hz
4 Sets the phase of subwoofer output.
The phase is reversed 180 degrees when set to "Reverse".
5 Returns to the Speaker setup screen.
•Set in both the front channel and rear channel simultaneously when using high pass filter function. You cannot set a correct crossover network if the high pass filter function is only used for one channel.
•The SUB Phase button is not displayed when the Subwoofer Low Pass Filter is set to "Through".
English 51