English 69
Connecting Wires to Terminals
Connect to vehicle's reverse lamp
harness when using the optional rear
view camera.
(Parking sensor wire)
Connect to the vehicle's parking
brake detection switch harness.
For best safety, be sure to connect
the parking sensor.

Light Green
Extension cable (Accessory 2)
Antenna Cord
FM/AM antenna input
Accessory 1
FUSE ( 10A )
If no connections are made, do not let the cable come out from the tab.
(Mute control wire)
Brown To the terminal that is grounded when either the telephone
rings or during conversation. (To connect the Kenwood
navigation system, consult your navigation manual.)
When using the optional power amplifier, connect to its
power control terminal.
(Power control wire)
Blue/White
(Reverse sensor wire)
Purple/White
Bluetooth Microphone
(Accessory 4) DDX630WBT/
DDX630WBTM only.
Subwoofer Preout (monaural)
(Steering remote control wire)
Connect to
vehicle's steering
wheel remote
control harness.
Connect to vehicle's harness.
Connect to vehicle's harness.
Pin Colour and functions
A1 Orange/White Dimmer
A2 Yellow Battery
A4 Red Ignition (ACC)
A5 Blue Antenna Control
A6 Black Earth (Ground) Connection
A8/A7 White+ / White/Black-Front Speaker (Left)
Pin Colour and functions
A10/A9 Gray+ / Gray/Black-Front Speaker (Right)
B2/B1 Green+ / Green/Black-Rear Speaker (Left)
B6/B5 Purple+ / Purple/Black-Rear Speaker (Right)
C6 Gray/Red Ground
C7 Light Green/Red Input 1
C8 Purple/Red Input 2
EN_LVT2272-001A_MX_200mm.indb 69EN_LVT2272-001A_MX_200mm.indb 69 11/12/15 13:0411/12/15 13:04