Playing a USB device
When connecting a USB device, playback starts automatically.
Remove the USB device
Press 
on the USB control screen to enter the USB suspend mode, and then remove the USB device. Refer to <USB Device Control> (page 39).
¤
• Removing the USB device before entering the USB suspend mode may result in damaging the data in the USB device.
⁄
•If the USB source is selected when a USB device is not connected, "No Device" is displayed.
•When the playback is stopped and then restarted, the playback will start from the point where it was stopped at the last time. Even if the USB is removed and connected again, the playback will start from the last stopped point unless the contents in the USB device is changed.
•Make sure that the USB device is connected firmly.
C
Switches the function screen
The function control screen switches in the following order each time you press the button.
Picture & Easy Control Panel
Source Control Screen
Picture Panel (OFF)
The following buttons are always displayed on the source control screen.
6
1
2
3
4
5 |
| 5 |
1Displays the Source Select screen. (page 52)
2Returns to the Source Control screen.
3Displays the Audio Control Menu screen. (page 84)
4Displays the SETUP Menu screen. (page 64)
5Adjusts the Volume.
6Clock display
⁄
•Touch 
displayed at bottom right of various screens to return to the original screen.
Next page 3
English 13