Connection

Ignition key switchACCCar fuse box

Car fuse box (Main fuse)

C

Battery

If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box.

A

B

A

Ignition wire (Red)

 

 

 

 

B

Battery wire (Yellow)

 

 

Ground wire (Black) -

Antenna Cord

 

 

 

 

 

 

C

(To car chassis)

 

 

 

 

FM/AM antenna input

Connect to the vehicle's parking brake detection switch harness.Parking sensor wire (Light Green)

PRK SW

For the sake of safety, be sure to connect the parking sensor.

 

Reveres sensor wire (Purple/White)

Connect to vehicle's reverse lamp harness when using the optional rear view camera.

To steering remote

Steering remote control input (Light Blue/Yellow)

To use the steering wheel remote control feature, you need to an exclusive remote adapter (not supplied) matches your car is required. When this terminal is not in use, leave its cap on.

To car light control switch

Connect to the terminal that is grounded when either the telephone rings or during conversation.

To connect the Kenwood navigation system, consult your navigation manual.

Depending on what antenna you are using, connect either to the control terminal of the motor antenna, or to the power terminal for the booster amplifier of the film-type antenna.

When using the optional power amplifier, connect to its power control terminal.

To "EXT.AMP.CONT." terminal of the amplifier having the external amp control function.

Dimmer control wire (Orange/White)Mute wire (Brown)Motor antenna control wire (Blue)Power control wire (Blue/White)External amplifier control wire (Pink/Black)
If no connections are made, do not let the cable come out from the tab.
4 DDX8032BT/DDX8032BTM