DMF-9020/MD-2070 (En)
28
1
Go to step 2 if setting adjustments are not required.
2
4
1Switch the REC MODE on.
2Select the setting adjustment mode.
3Set the selection (by pressing the JOG DIAL).
Adjust the settings if required.
Recording (DIGITAL input)
Recording is possible using recordable Mini Discs. When this unit is connected with a component equipped with digital output,
such as a CD player, through a digital cord or optical fiber cable, the signal input through the DIGITAL input jack can be recorded
in the digital format (this recording is referred to as digital recording). Enjoy high-quality sound of digital recording!
Preparation
1Open the write protect tab of the Mini Disc to make it recordable. 8
2Load the Mini Disc.
3Check the remaining recording time. o
4Set the amplifier’s input selector to the source to be recorded.
Select AUTO or MANUAL. (Remotecontrol unit only)
Select one of “DIGITAL 1, 2 and 3 ”.
Each press switches the mode.
1REC MODE : off
2REC MODE : on
Each press switches the mode.
1goes off (AUTO) : Track numbers are marked automatically.
£
2MANUAL : Track numbers can be marked as desired.
£
÷For details on the setting adjustment modes, see “REC MODE key”.
£
DIGITAL recording
AUTO/MANU.
The modes are switched by rotating the JOG DIAL.
D. REC LEVEL? : Digital recording level setting.
AUTO CUT? : AUTO CUT on/off selection.
AUTO TIME? : Setting of the time for detecting a no-sound
blank section during automatic track number
marking.
AUTO LEVEL? : Automatic track number marking no-sound
blank detection level and SOUND SYNCHRO
REC, AUTO CUT and REC AUTO PAUSE sound
detection level setting
FADE TIME? : Setting of the fading time in fade-in and fade-
out.
REC= WRITING? : Setting of the UTOC writing after recording.
Each press switches the mode.
1ANALOG : Analog “stereo mode”
2DIGITAL 1 : Coaxial input mode
3DIGITAL 2 : Optical input mode
4DIGITAL 3 : Coaxial input mode
5MONO : Analog “monaural long-play mode”
To fade in and fade out the music.
3
Press in stop mode. Each press switches the mode.
1FADE not lit : Fade mode is off
2FADE lit : Fade mode is on
÷For details on fade-in and fade-out, see “When FADE TIME? is
displayed” (¢) and “Faded recording of MD” (º).
FADE/
DELETE
REC MODE
/CHARAC.
4¢
U PDOWN
PUSH SET
JOG DIAL
4¢
U PDOWN
PUSH SET
JOG DIAL
REC INPUT