Kenwood DNX5120 Remote Controller

Remote Controller

This unit can be operated using the optional Remote Controller KNA-RCDV330.

¤

•Put the Remote Controller in a place where it will not move during braking or other operations. A dangerous situation could result, if the Remote Controller falls down and gets wedged under the pedals while driving.

•Do not place the battery near an open flame or heat source. This may cause the battery to explode.

•Do not recharge, short, break up or heat the battery or place it in an open fire. Such actions may cause the battery to leak fluid. If spilled fluid comes in contact with your eyes or on clothing, immediately rinse with water and consult a physician.

•Place the battery out of reach of children. In the unlikely event that a child swallows the battery, immediately consult a physician.

Battery installation

Use two "AAA"/"R03"-size batteries.

Insert the batteries with the + and – poles aligned properly, following the illustration inside the case.

⁄

•If the Remote Controller operates only over shorter distances or does not operate at all, it is possible that the batteries are depleted. In such instances, replace the both batteries with new ones.

Remote Controller mode switch

The functions operated from the remote controller differ depending on the position of the mode switch.

		AUD mode
		Switch to this mode when
		controlling a selected source or
	POSITION	tuner source, etc.
		DVD mode
	AUD	Switch to this mode when playing
		DVDs or CDs etc. with the player
	•
O	DVD •	integrated in this unit.
	T V •	Not used
	•
	NAVI
RETURN		NAVI mode
CANCEL		This is switched when controlling
		Navigation unit.

⁄

•The position of the remote control mode switch is indicated in the title of each mode, e.g., "(AUD mode)".

•When controlling a player that is not integrated in the

unit, select "AUD" mode.

86DNX5120/DNX512EX/DNX512EX/DDX512/DDX5032