Kenwood DPF-1010, DPF-2010 Normal play (TRACK mode), Playing tracks in order from track No. 1

12
DPF-3010/2010/1010 (En)
Normal play (TRACK mode)
2
Load a disc.
3
Start playback.
1Open the tray.
Use the following procedure to play a CD in the original order
of tracks from track No. 1.
: Keys and control used in the operations described on this page.
3Close the tray.
Playing tracks in order from track No. 1
÷Playback starts when a disc has been loaded.
To pause playback
2Place a disc.
Disc tray
Press the ON/STANDBY switch to ON.
Label side
÷After a few seconds, play starts from the track No. 1.
Elapsed time of track being played
Track NO. being played
1
Lights up.
÷Each press pauses and plays the CD alternately.
To stop playback
÷Do not touch the played side of disc.
÷Loading two discs together will cause malfunctioning.
÷Place the disc properly along the groove on the tray. (If the disc is not
placed horizontally, malfunction will result.)
÷A single CD (8 cm disc) can also be played.
÷Ordinary CD single (8 cm) disc adapters sold in audio stores cannot be
used with this unit.
Lights up.
The track Nos. recorded on the CD are displayed.
1¡
4
76
¢
ON/STANDBY
0
1¡

4
76
¢
0
6
PLAY/PAUSE
6
PLAY/PAUSE
TRACK
7
STOP
TRACK TRACK
NO. SINGLE TIME
6
1
7
2
8
3
9
4
10
5
0
:
1
000
TRACK TRACK
NO. SINGLE TIME
6
1
7
2
8
3
9
4
10
5
0
:
1
005
The figure shows an example for the DPF-3010