14
Programmed play (PGM mode)
Use the following procedure to program desired tracks in a
desired order. (up to 20 tracks)
÷ Load a disc in the CD player. @
Press so that the “PGM” indicator lights.
Program desired tracks.
1
2
Preparation
: Keys and control used in the operations described on this page.
÷The programmed contents remain in memory.
To stop playback
Start playback.
3
÷When the 4 or ¢ key is pressed during playback, the track will be
skipped in the direction of the pressed button.
÷When the 4 key is pressed once during playback, the play position
returns to the beginning of the current track being played.
Lights up.
Displays the total playing time
of the programmed tracks.
÷Up to 20 tracks can be programmed. When “FULL” is displayed, no
more tracks can be programmed.
÷If you make a mistake, press the CLEAR key and enter the track No.
from the beginning.
÷When the total playing time of the programmed tracks exceeds 100
minutes, the remaining time on the disc will not be displayed any more.
2Set the entry.
1Select the desired track No.
Press the numeric keys as
shown below....
To enter track No. 15: 05
Go to step 2 within 5 seconds.
3Repeat steps 1 and 2 above.
Do this operation in the stop mode.
Displays the entered program No.
for a few seconds.
076
0
0
0
0
TRACK
NO.
PGM
01
TRACK
NO.
02
P_ 01
TRACK
NO. TOTAL TIME
0
_
:
2
16 42
123
456
789
0 +10
7
6
P.MODE
P.MODE
Go to step 2 within 5 seconds.
Main unit
(Except for DPF-2030)
Remote control unit
(Except for DPF-1030)
The figure shows an example for the DPF-2030
(Programming is not
possible during playback)