Kenwood DPF-1030, DPF-2030 - page 16

16
Repeated playback
To repeat only the programmed tracks
: Keys and control used in the operations described on this page.
™
Preparation
To cancel repeated playback
Press the REPEAT key again.
Lights up.
1
Press so that the "PGM" indicator lights.
2 Select the desired track No.
5 Switch REPEAT ON.
6 Start playback.
4 Repeat steps 2 and 3 above.
Go to step 3 within 5 seconds.
3 Set the entry.
÷All of the programmed tracks will be repeated.
÷In case only one track is programmed, only that track will be repeated.
÷Up to 20 tracks can be programmed. When “FULL” is displayed, no
more tracks can be programmed.
Lights up.
Goes off.
Do this operation in the stop mode.
÷ Load a disc in the CD player. @
076
4¢
1¡
0
0
0
0
0
REPEAT
6
REPEAT
P.MODE
P.MODE
TRACK
NO.
PGM
REPEAT
01
TRACK
NO.
PGM
01
TRACK TRACK
NO.
PGM
REPEAT
01
Press the numeric keys as
shown below....
To enter track No. 15: 05
123
456
789
0 +10
4¢
Main unit
(Except for DPF-2030)
Remote control unit
(Except for DPF-1030)
The figure shows an example for the DPF-2030