1Enter the Audio Control mode
Press the [AUD] button for at least 1 second.
"AUD mode" is displayed.
2Select the Audio item for adjustment
Press the [FM] or [AM] button.
Each time the button is pressed, the items that can be adjusted
switch as shown below.
3Adjust the Audio item
Press the [4] or [¢] button.
Audio Control
The <Adjustment of Equalizer type at PRO> can be preset.
1Refer to <Adjustment of Equalizer type at PRO> (page 10) to
adjust the Equalizer type.
2Preset the adjusted value
Press the [#1] —[#3] button for at least 2 seconds.
Recalling a setting value
1Enter the Equalizer Control mode
Press the [EQ] button.
"EQ PRO" is displayed.
If "EQ EASY" is displayed, refer to <Equalizer mode> (page 24) to
set the mode to "EQ PRO".
2Recall the setting value
Press the [#1] —[#3] button.
Memory preset of adjustment of Equalizer type
Adjusting the effect of an Equalizer type selected in <Equalizer
Control> when <Equalizer mode> is "PRO".
1Refer to <Equalizer Control> (page 9) to select the Equalizer
type.
2Select the item for adjustment
Press the [FM] or [AM] button.
Each time the button is pressed, the items that can be adjusted
switch as shown below.
3Adjust the item
Press the [4] or [¢] button.
Adjustment Item Display Range
Bass Center Frequency "Bas F" 60/70/80/100 or 150 Hz
Bass level "Bas LV" –12 — +12 dB
Bass Q Factor "Bas Q" 1.00/1.25/1.50/2.00
Bass Extend "EXT" On/Off
Middle Center Frequency "Mid F" 0.5/1.0/1.5/2.0 kHz
Middle level "Mid LV" –12 — +12 dB
Middle Q Factor "Mid Q" 1.0/2.0
Treble Center Frequency "Tre F" 10.0/12.5/15.0/17.5 kHz
Treble level "Tre LV" –12 — +12 dB
•According to the Bass Q Factor setting value, the frequencies that
can be set in Bass Center Frequency change as shown below.
Bass Q Factor Bass Center Frequency
1.00/1.25/1.50 60/70/80/100
2.00 60/70/80/150
•When the Bass Extend is set to ON, low frequency response is
extended by 20%.
Adjustment of Equalizer type at PRO
General features
— 10 —
English
DPX-MP4030(M)_U.S r1 02.2.19 10:31 AM Page 10