Kenwood DPX-MP3110, DPX-MP4110, DPX-MP5110U Menu Glossary, For operating KCA-BT100, •AMP, Manual, Display, Display, •SUPREME, •CD READ, Operation, Tuning mode, •ZONE2 (Dual Zone)

Menu Glossary

•SWPRE (Switching Preout)

Switches the preout between rear output (“R”) and subwoofer output (“SW”).

•SUPREME

Technology to extrapolate and supplement with proprietary algorithm, the high-frequency range that is cut off when encoding at low bit rate (less than 128Kbps, Sampling frequency is 44.1kHz).

Supplementing is optimized by compression format (AAC, MP3 or WMA) and processed according to bit rate.

The effect is negligible with music that is encoded at high bit rate, variable bit rate or has minimal high frequency range.

•CD READ

Sets the method for reading CD.

When unable to play special format CD, set this function to “2” to force playing. Note that some music CD may be unplayable even when set to “2”. In addition, audio files cannot be played when set to “2”. Normally, keep this set to “1”.

1 : Automatically distinguishes between audio file disc and music CD when playing disc.

2 : Forces playing as music CD.

•ZONE2 (Dual Zone)

Set the destination (front speaker “F” or rear speaker “R”) of the sub source (AUX IN) when the Dual Zone function is turned on.

•AMP

Selecting “Off” turns off the built-in amplifier. Turning off the built-in amplifier improves the quality of the sound from Preout.

•AUTO (Tuning mode select) Select a tuning mode of the radio.

Tuning mode	Display	Operation
Auto seek	“Auto1”	Automatic search for a station.
Preset station seek	“Auto2”	Search in order of the stations in the
		Preset memory.
Manual	“Manual”	Normal manual tuning control.

• I-EFCT (Illumination effect)

Set the illumination color effect.

Illumination effect mode	Display
Mode off	“0”
Illumination color will change to variable, each time this	“1”
unit is operated.
Illumination color will be mono-color and then	“2”
illumination color will change variable with the playback
tone of sound.
Illumination color will be mono-color and then	“3”
illumination brightness will change with the playback
tone of sound.

For operating KCA-BT100

To control KCA-BT100, operate as follows;

To make setting for <Selecting the Dialing Mode>, select <Menu System> (page 14). Pressing the [ATT] button at least 1 second after selecting the “DIALING MODE” item allows you to enter the dialing method selection mode. To exit from dialing method selection mode, press [ATT] button at least 1 second.

To make <Disconnecting a Call>, <Clearing the Disconnection Message>, and <Rejecting an Incoming call>, press [ATT] button for at least 1 second.

Moreover, some displays are different from the description of KCA-BT100 Instruction Manual.

Displays of KCA-BT100 Instruction	Actual displays on this unit
Manual
“DISCONCT”	“HF D-CON”
“CONNECT”	“HF CON”
“PHN-DEL”	“DVC-DEL”
“P-STATUS”	“D-Status”
“BT-CON Y”	“HF-CON Y”
“BT-CON N”	“HF-CON N”