32

DVD Dynamic Range

1Press Cursor up/down (5/∞) keys on the remote to select Dynamic Range on the set up menu dis- play, then press the ENTER key.

MULTI CONTROL

ENTER

(Dynamic Range menu appears.)

Operations

on the remote to select Dynamic

 

2Press Cursor up/down (5/∞) keys

 

Range mode (on or off), then press

 

the ENTER key.

 

 

MULTI CONTROL

ENTER

÷Press PLAY key to resume normal playback.

DTS disclaimer clause

When playing DTS-encoded (CDs, DVDs), excessive noise will be exhibited from the analog stereo outputs. To avoid possible damage to the audio system, the consumer should take proper pre-cautions when the analog stereo outputs of the DVD player is connected to an amplification system. To enjoy DTS Digital Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder system must be connected to the digital output (S/P DIF, AES/EBU, or TosLink) of the DVD player.

Set Up functions

DV-503/DVF-3550 (EN/K,P,T,M,X)

DVD Digital Audio Out

PCM

: Choose this setting for all connection

 

scenarios, except the Dolby Digital or

 

DTS receiver or decoder connection.

Dolby Digital : Choose this setting if you connected Dolby Digital receiver or decoder to your DVD player.

DTS

: Choose this setting if you connected

 

DTS receiver or decoder to your DVD

 

player

For Europe and U.K.

MPEG-2/DTS : Choose this setting if you connected DTS receiver, decoder or MPEG audio to your DVD player.

1Press Cursor up/down (5/∞) keys on the remote to select Digital Au- dio Out on the set up menu dis- play, then press the ENTER key.

MULTI CONTROL

ENTER

(Digital Audio Out display appears.)

2Press Cursor up/down (5/∞) keys on the remote to select specific Digital Audio Out mode, then

press the ENTER key.

MULTI CONTROL

ENTER

÷Press PLAY key to resume normal playback.

Note

When the DTS of Digital Audio Out or the Dolby Digital setting and the format recorded on the disc are different from each other, audio may not be put out. Please switch according to the indication on the disc.