12
Preparations
DV-705/DVF-R5070 (EN/K,P,E,Y)
Connecting to an Audio component
AV
AV receiver or
AV amplifier
Video cord or S-video cord
Audio cord
Coaxial or Optical cable
(For Europe)
TV
TV
AV receiver or
AV amplifier
Video cord, S-video cord or
Component cords
Audio cord
Coaxial or Optical cable
(For other countries)
1. In case an associated system component is connected, also read the instruction manual of the component.
2. Insert the optical-fiber cable straight into the connector until it clicks.
3. Never bend or bundle the optical-fiber cable.
Notes
Notes
Notes
Connecting to a TV with Component input terminals (For some countries)
TV
Note
Note
Note

Please note that when PROGRESSIVE is

selected, only COMPONENT VIDEO

OUTPUT is available, while other video

output is not present.

Component cords
Audio cord

System Connections

Select the scanning method of the Component
Video output using the COMPONENT VIDEO OUT-
PUT switch on the rear panel.
INTERLACE: Scanning method is fixed at interlaced
scanning.
PROGRESSIVE: When progressive scanning is un-
available with certain discs, the scanning method is
switched automatically to interlaced scanning.
When the scanning method is changed, the scan-
ning status will be displayed for a few seconds.
[ For U.S.A., Canada and U.S. Military]
Video cord or S-video cord
Video cord, S-video cord or
Component cords
For playback of DTS audio, please connect an AV receiver or an AV amplifier which can decode DTS by digital con-
nection.